Skip to content
Pneumatic gripper clamps with fully adjustment opening angle JD40 Series
J-Series
Complete reliability of the angle adjustment over time integrated mechanism secures the adjusted position and prevents any sliding or opening angle displacement. A retain mechanism secures the adjustment tool in its seat and prevents the Allen wrench to fall down during the adjustment procedure.
Even without air, the clamp can be toggle-locked through the adjustment means.
Sealed roller bearings
Lightweight design, which does not compromise the stiffness and strength of the housings.
Equipped with sealed roller bearings, to ensure a high protection degree against contaminants > fully encapsulated housing.
No flow valve required
No slamming towards the opening position due to an optimal integrated cushioning system.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
Technical features
Manual release button to open the linkage when air pressure is removed during setup. Pneumatic ports on both sides of the cylinder. | |
Operating pressure | from 2 to 8 bar / from 30 to 115 psi |
Lubrication | all the devices are lubricated for life at the factory. Inline air lubrication isn’t required |
JD_40E / Gripper clamp – Size 40 mm – Manual operation
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th