Add to wishlist
MUETEC - SIL2-Voltage monitoring transmitter HVT 400-DX

Muetec (Mütec) – HVT 400-DX Failsafe High Voltage Monitor for up to 1.500V AC/DC

จุดเด่นของ HVT 400-DX

  • Failsafe voltage monitoring
  • Simple software configuration via USB or Modbus
  • 0-1500V AC/DC measurement range
  • Redundant architecture
  • Robust design with high dielectric strength
  • SIL2 according to IEC/EN 61508
  • Two individual safety outputs
  • LED status: Power, Error, Alarm
  • 10-year proof test interval
Send Email LINE OA
หมวดหมู่: , ป้ายกำกับ: ,
Description

HVT 400-DX Failsafe High Voltage Monitor for up to 1.500V AC/DC

Typically, the voltage transmitter is used in applications in which safety measures must be switched safely depending on a certain voltage threshold (for example 50 V). This can be e.g. controlling the access to an automotive test bed with high powertrain voltages >800 V.Electrification of numerous industries is prevalent. This is especially true for the automotive industry. Voltage levels of next generation powertrains or batteries in electric cars and trucks are increasing. Currently, 800-1200V is made standard to achieve higher efficiency and faster charging time. This poses challenges to the safety of workers and equipment during manufacturing and testing of high voltage powertrain components.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

HVT 400-DX Failsafe High Voltage Monitor for up to 1.500V AC/DC

Scope of use

  • Battery
  • Battery Management System
  • Motor
  • Inverter
  • Climate Aggregate
  • Charger
  • Compressor
  • HV-Supply
Certificate
SIL 2 according to IEC 61508
Measurement range
Overrange
Input Resistance
0.. 1500V AC/DC
1800V (permanent)
12 MΩ
Analog Output
Load
Accuracy
0… 22 mA / 22…0 mA
Max 500 Ω at 22mA
< 0,005%
Contact outputs
Switching Power
Switching Voltage
Switching Current
Contact Material
Normally Open
Max 62,5 VA / Max 30W
Max 125VAC/110VDC
Max. 1A
AG Pd + 10 µAu
Status LEDs
Power: Green
Error / SIL Alarm: Red
REL1/REL2: Yellow
USB Interface Front socket
USB 2.0
RS485 Interface
Baud rate
Device Address
Half duplex, no scheduling
9600 bps
1-248
Supply
power Consumption
24VDC (20…30VDC)
Max. 1,9W
Temperature
Storage / Transport
Perm. Humidity
Max. operating
Altitude
- 10°C…+60°C
- 20°C…+70°C
10%...90% r.H no cond.
<2000m above mean sea level
Temperature
Coefficient
Galvanic isolation
Overvoltage
category
<0,01%/K (max)
<0,005%/K (typical)
4,3 kV AC test voltage
CAT II: 1500V Pollution
Level 1
PCB Material
Housing Material
Protection Class
Flammability UL94
Mounting type
FR4
Polyamide
IP20
V0
35mm DIN rail

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th