Burkert – Type SE36 ELEMENT Transmitter for Inline Sensor Fitting

type se36

• Burkert - Type S030 Inline Sensor Fitting with Paddle Wheel for Flow Measurement
• Burkert - Type S077 Positive Displacement Sensor Fitting for Continuous Flow Measurement
• BURKERT - TYPE 6213 2/2 Way Servo-Assisted Diaphragm Valve
• Burkert - Type 8619 multiCELL Multi Channel and Multi Function Transmitter / Controller
• Burkert - Universal Process Controller Type 8611
• Burkert - Type 8644 AirLINE SP electropneumatic automation system
• BURKERT - TYPE 2030 Pneumatically operated 2/2 way diaphragm valve CLASSIC with plastic valve body
• BURKERT - TYPE 8692 Digital Electropneumatic Positioner for Integrated Mounting on Process Control Valves

General Technical Data

Product properties
Material	Please make sure the device materials are compatible with the fluid you are using. Detailed information can be found in chapter “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 6.
Non wetted parts
Housing	Stainless steel 1.4404 (316L), PPS
Cover	Polycarbonate (PC), transparent (opaque on request)
Display/configuration module	PC
Navigation key	PBT
Seals	EPDM, silicone
Screws	Stainless steel 1.4401 (316 (A4))
Fixed connector holder	PPS CF30
Fixed connector	Nickel-plated brass (stainless steel on request)
Grounding terminal and screw	Stainless steel 1.4301 (304 (A2))
Quarter turn system	PC
Wetted parts
Sensor-fitting body	Aluminium or stainless steel (316L)
Seal	FKM or FEP/PTFE encapsulated
Oval gear	PPS, aluminium or stainless steel (316L)
Shaft	Stainless steel (316L)
Product accessories Display/configuration module	Grey dot matrix 128 x 64 with backlighting
Performance data
Measurement deviation	• With K-factor determined with a teach-in procedure or with the specific K-factor, engraved on the sensor-fitting: ± 0.5 % of the measured value (at Teach-In flow rate value) • With standard K-factor: ± 1 % of the measured value
Repeatability	± 0.03 % of the measured value
4…20 mA output uncertainty	± 1 % of range
Electrical data
Operating voltage	• 2 or 3 outputs transmitter (2-wire) version: 14…36 V DC, filtered and regulated • 4 outputs transmitter (3-wire) version: 12…36 V DC, filtered and regulated Connection to main supply: permanent (through external SELV (Safety Extra Low Volt-age) and LPS (Limited Power Source) power supply
Power source (not supplied)	Limited power source according to UL/EN 60950-1 standards or limited energy circuit according to UL/EN 61010-1 §9.4
DC reverse polarity protection	Yes
Overvoltage protection	Yes
Current consumption	With sensor • ≤ 1 A (with transistors load) • 2 or 3 outputs transmitter (2-wire) version: ≤ 25 mA (at 14 V DC without transistors load, with current loop) • 4 outputs transmitter (3-wire) version: ≤ 5 mA (at 12 V DC without transistors load, without current loop)
Power consumption	Max. 40 W
Outputs Transistor	Protected against overvoltage, polarity reversals and short circuit • 1 transistor output (transmitter 2-wire): – NPN, open collector – 1…36 V DC – Max. 700 mA • 2 transistor outputs (transmitter 2 or 3-wire): – Adjustable as sourcing or sinking (respectively both as PNP or NPN ), open collector – Max. 700 mA – 0.5 A max. per transistor if the 2 transistor outputs are wired – NPN-output: 1…36 V DC – PNP-output: Power supply
Current	4…20 mA adjustable as sourcing or sinking (in the same mode as transistor): • 1 current output (transmitter 2-wire) Max. loop impedance: 1100 Ω at 36 V DC; 610 Ω at 24 V DC; 180 Ω at 14 V DC • 2 current outputs (transmitter 3-wire) Max. loop impedance: 1100 Ω at 36 V DC; 610 Ω at 24 V DC; 100 Ω at 12 V DC
Voltage supply cable	For the female M12 connector and/or the male M12 connector (not supplied, to order separately, see chapter “9.5. Ordering chart accessories” on page 11) use a shielded cable. • Ø 3…6.5 mm • Cross section of wires: max. 0.75 mm²
Medium data
Fluid temperature	With sensor-fitting S070 in: • Aluminium: – 20…+ 80 °C (- 4…+ 176 °F) • Stainless steel: – 20…+ 120 °C (- 4…+ 248 °F) See data sheet Type S077  for more information.
Fluid pressure (max.)	• DN 15: 55 bar (798.05 PSI) (threaded process connection) • DN25: 55 bar (798.05 PSI)1.) • DN40 or DN50: 18 bar (261.18 PSI) • DN80: 12 bar (174.12 PSI) • DN100: 10 bar (145.1 PSI) See data sheet Type S077 for more information.
Viscosity	Max. 1 Pa.s (higher on request)
Rate of solid particles	0%
Process/Port connection & communication
Process connection	• Thread: ½”; 1″; 1½”; 2″; 3″ (G or NPT) • Flange: – 25; 40; 50; 80 or 100 mm DIN PN16 flange – 1″; 1½”; 2″; 3″ or 4″ ANSI 150LB flange
Electrical connection	• 2 or 3 outputs transmitter (2-wire) version: 1 x 5 pin M12 male fixed connector • 4 outputs transmitter (3-wire) version: 1 x 5 pin M12 male and 1 x 5 pin M12 female fixed connectors
Approvals and Certificates
Standards Degree of protection2.)	IP65, IP67 (according to IEC/EN 60529), NEMA 4X (according to NEMA250) with device wired and M12 cable plug mounted and tightened and cover fully screwed down
CE directives	The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable)
Pressure equipment directives	Complying with Article 4, Paragraph 1 of 2014/68/EU directive Detailed information on the pressure equipment directive can be found in chapter “2.2. Pressure Equipment Directive” on page 5.
Certification	UL-Recognized for US and Canada
Environment and installation
Ambient temperature	Operation and storage: – 10…+ 60 °C (+ 14…+ 140 °F)
Relative air humidity	≤ 85 %, without condensation
Height above sea level	Max. 2000 m
Operating condition	Continuous
Equipment mobility	Fixed
Application range	Indoor and outdoor (protect the device against electromagnetic interference, ultraviolet rays and against the effects of climatic conditions)
Installation category	Category I according to UL/EN 61010-1
Pollution degree	Degree 2 according to UL/EN 61010-1

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th