Add to wishlist
Burkert-Type S056 - Magnetic inductive sensor with hygienic _process connections

Burkert – Type S056 – Magnetic Inductive Sensor with Hygienic Process Connection

  • Hygienic version, 3A certificate
  • For food and beverage or pharmaceutical applications
  • Flow rate measurements 0.2…approx. 4,500 l/min for DN 03…DN 100
  • For connection to a transmitter Type SE58 (with or without display, in compact or remote version) for flow measurement
Send Email LINE OA
หมวดหมู่: ,

Magnetic inductive sensor with hygienic process connections

The Type S056 magnetically inductive flow sensor (compact or separate version) is suitable for low-flow applications and liquids with minimum conductivity. The combination with the dedicated SE58 S transmitter (minimum required conductivity: 20 µS/cm) or with the SE58 M or SE58 L transmitters (minimum conductivity required: 5 µS/cm) results in a flowmeter with different performance, functions, materials and approvals, with the corresponding suitability for the respective applications depending on the respective requirements. With the SE58 S you get a compact device, with the SE58 M and SE58 L compact devices or remote versions are created for which the transmitter and sensor are connected by 2 cables up to a maximum length. Standard process connections available for the S056 are clamp or thread (dairy thread) connections.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type s056

TYPE s056 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Sensor housing Stainless­steel­304/1.4301
Junction­box Only­for­remote­sensor:­stainless­steel­304­(1.4301)­polished
Lining PTFE­(conform­to­FDA)
Electrode Stainless­steel­316L­(conform­to­FDA)
Seal FKM­(conform­to­FDA),­EPDM­(on­request,­conform­to­FDA)
Pipe diameter DN 03…DN 100
Dimensions Detailed­information­can­be­found­in­chapter­“2. Dimensions” on page 5.
Measuring principle Electromagnetic inductionDetailed­information­can­be­found­in­chapter­“4.1. Measuring principle” on page 10.
Measuring range 0…10 l/h­to­0…280 m3/hDetailed­information­can­be­found­in­chapter­“5.4. Ordering chart sensor Type S056” on page 12.

Performance data
Measurement deviation If­used­with­SE58­transmitter:-in­compact­or­remote­L­version:­≤­±­0.2­%­of­the­measured­value­for­flow­velocity­>­0.5 m/s-in­compact­or­remote­M­version:­≤­±­0.8­%­of­the­measured­value­for­flow­velocity­>­0.5 m/s-in­compact­S­version:­≤­±­0.5­%­of­the­measured­value­for­flow­velocity­>­0.5 m/s See data sheet Type SE58
Repeatability If­used­with­SE58­transmitter:•­in­compact­or­remote­L­version:­≤­±­0.1­%­of­the­measured­value­for­flow­velocity­>­0.5 m/s•­in­compact­or­remote­M­version:­­≤­±­0.4­%­of­the­measured­value­for­flow­velocity­>­0.5 m/s•­in­compact­S­version:­≤­±­0.25­%­of­the­measured­value­for­flow­velocity­>­0.5 m/sSee data sheet Type SE58
Vacuum resistance 200 mbar­(2.9 PSI)­absolute­at­100­°C­(212­°F)

Medium data
Fluid temperature -Compact­version:­-­20…+­110­°C­(-­4…+­230­°F)­(130°C­(+­266­°F)­allowed­for­60 min­for­steam/hot­water­cleaning)-Remote­version:­-­20…+­130­°C­(-­4…+­266­°F)
Fluid pressure PN 16
Minimum conductivity 5 µS/cm­(or­20 µS/cm­with­demineralised­water)
Outputs • Transistor: 2 outputs, selectable open collector as pulse/frequency (1250 Hz, 100 mA, 40 V DC) or alarm (adjustable usage)• Current: 1 output, 4…20 mA, RL = 1000 W (+ a second output, on request)• Serial interface (on request): RS-232, RS-485 (Modbus protocol available)
Galvanic isolation All the input/outputs are galvanically isolated from power supply

Process/Port connection & communication
Process connection DIN 11851,­clamp­ISO 2852­or­clamp­BS 4825­(SMS 1146­(from­DN 10)­on­request)
Electrical connection 2 cable glands PG9 (for remote version of the sensor)

Approvals and certificates
CE directive The­applied­standards,­which­verify­conformity­with­the­EU­Directives,­can­be­found­on­the­EU Type­Examination­Certificate­and/or­the­EU­Declaration­of­conformity­(if­applicable).
Pressure­equipment­directive The­applied­standards,­which­verify­conformity­with­the­EU­Directives,­can­be­found­on­the­EU Type­Examination­Certificate­and/or­the­EU­Declaration­of­conformity­(if­applicable).The­device­is­subject­to­the­requirements­of­the­Pressure­Equipment­Directive­2014/68/EU. Category­II­device­for­group­1­and­2­fluids­under­the­following­conditions:- maximum­allowable­pressure­(PS)­≤­40 bar- minimum/maximum­temperature­(TS):­-­10/+­130­°C- within­the­following­limits­for­liquids­of­group­2:- PN 40­for­DN 40…DN 250- within­the­following­limits­for­liquids­of­group­1­with­a­vapour­pressure­at­the­maxi-mum­allowable­temperature­not­exceeding­0.5 bar (g):­for­diameters­above­DN 25­and­PS­x­DN­>­2000

Environment and installation
Ambient temperature According­to­the­used­version­of­SE58­transmitter­and­its­materialDetailed­information­can­be­found­in­the­data­sheet­of­the­transmitter,­see­data sheet Type SE58.
Relative air humidity ≤­90­%,­without­condensation
Height above sea level Max.­2000 m
Operating condition Continuous
Equipment mobility Fixed device
Application range Indoor­and­outdoor­(protect­the­device­against­electromagnetic­interference,­ultraviolet­rays and­against­the­effects­of­climatic­conditions)
Degree­of­protection­according­to­­IEC/EN 60529 If­use­with­SE58­transmitter:-in compact L and M version: IP67 (IP68 optional)-in compact S version: IP67 (IP68 optional)-in remote L and M version: IP68 See data sheet Type SE58
Installation category Category II according to UL/EN 61010-1
Pollution degree Degree 2 according to UL/EN 61010-1

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th