Burkert – Type S020 – Insertion Fitting for Flow or Analytical Measurement

type s020

• Burkert - Type 8020 - Insertion Flowmeter with Paddle Wheel
• Burkert - Type 8025 Insertion Flowmeter or Batch Controller with Paddle Wheel and Flow Transmitter or Remote Batch Controller
• Burkert - Type 8026 - ELEMENT Design Insertion Flowmeter with Paddle Wheel
• Burkert - Type 8041 Insertion Magnetic Inductive Flowmeter
• Burkert - Type 8045 Insertion Magnetic Inductive Flowmeter
• Burkert - Type 8228 - ELEMENT Design Inductive Conductivity Meter
• Burkert - Type 8200 - Armatures for Analysis Sensors

General Technical Data

Product properties
Material	Please make sure the device materials are compatible with the fluid you are using. Detailed information can be found in chapter “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 5.
Wetted parts
For G 2″ flowmeter connection	Body & adapter respectively in brass (CuZn39Pb2) & stainless steel (316L – 1.4404) or all in stainless steel (316L – 1.4404), PVC, PP, PVDF or PE (depending on S020 version) Seal in FKM or EPDM (depending on S020 version)
For clamp flowmeter connection	Stainless steel 316L
Dimensions	Detailed information can be found in chapter “4. Dimensions” on page 6.
Compatibility	With flowmeters Type 8020, 8025, 8026, 8041, 8045 or analytical measuring devices Type 8200/8203, 8220 or 8228
Pipe diameter For G 2″ flowmeter connection	DN06…DN400 Combination between fitting and measuring device is sometimes restricted to some DN. Detailed information can be found in chapter “7.3. Combination of the S020 with a meas-uring device for flow rate, pH or ORP, conductivity measurement” on page 19.
For clamp flowmeter connection	DN32…DN100
Surface quality For clamp flowmeter connection	Ra < 0.8 µm (excluding welding seams)
Medium data
Fluid temperature1.)	For fitting in: • PVC: 0… + 50 °C ( + 32… + 122 °F) • PP: 0… + 80 °C ( + 32… + 176 °F) • PVDF: – 15… + 100 °C ( + 5… + 212 °F) • PE: + 5… + 70 °C ( + 41… + 158 °F) • Stainless steel, brass: – 15… + 160 °C ( + 5… + 320 °F)
Fluid pressure (max.)1.)	• PN10 for plastic sensor-fitting • PN16 for metal sensor-fitting Detailed information can be found in chapter “5.1. Pressure temperature diagram” on page 14.
Process/Port connection & communication
Measuring device connection	G 2″ or clamp connection
Process connection	• Metal fitting: internal or external thread, weld ends, clamp or flange • Plastic fitting: true union with nut and solvent/fusion socket, spigot or external thread, saddle
Approvals and Certificates
Directives CE directives	The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable)
Pressure equipment directives	Complying with Article 4, Paragraph 1 of 2014/68/EU directive. Detailed information on the pressure equipment directive can be found in chapter “2.2. Pressure Equipment Directive” on page 5.
Certificates	Certificates must be ordered separately. Detailed information can be found in chapter “Ac-cessories for all versions” on page 23. • Inspection certificate 3.1 (acc. to EN-ISO 10204) • Test report 2.2 (acc. to EN-ISO 10204) • Certification of Conformity for the surface Quality (DIN4762-DIN4768-ISO/4287/1) • 3 points Flow calibration certificate • FDA declaration of conformity (stainless steel fitting only with EPDM seal)
Environment and installation
Ambient temperature	Operation and storage: Temperature limits may depend on the inserted device. Refer to the relevant data sheet or instruction manual for more details.

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th