Add to wishlist
Burkert - Type MS02 - Chlorine (Cl2) or chlorine dioxide (ClO2) Sensor Cube

Burkert – Type MS02 Chlorine (Cl2) or Chlorine Dioxide (ClO2) Sensor Cube

จุดเด่นของ Type MS02

  • MEMS technology sensor
  • Minimal sample water consumption
  • Optional pH compensated chlorine measurement
  • Hot swap compatible for exchanging the sensor cube during operation
  • Fully compatible with büS systems and a wide range of further analysis sensor cubes
Send Email LINE OA
หมวดหมู่: , ,

Chlorine (Cl2 ) or chlorine dioxide (ClO2 ) Sensor Cube

This sensor cube measures the free acting chlorine or chlorine dioxide in the water, depending on the variant. The sensor cube is designed for operation on the fluidic backplane in the device Type 8905 Online Analysis System.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type ms02

BURKERT TYPE ms02 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Material Please make sure the device materials are compatible with the fluid you are using.
Detailed information can be found in chapter “2.1. Chemical Resistance Chart – Bürkert resistApp” on page 4.
Housing PPE+PS
Lever Zamak, painted
Seals EPDM
Dimensions Detailed information can be found in chapter “3. Dimensions” on page 5.
Chlorine/chlorine dioxide sensor Membrane covered PT-cell, amperiometric 3 electrodes measurement, without electro-lyte
Temperature sensor Pt1000 Class B, no contact with the water sample
Compatibility With Online Analysis System Type 8905 (the electrical and fluidic contact is made via backplane system.)
Detailed information can be found in the data sheet of the online analysis system, see data sheet Type 8905  for more information.

Measuring range
Chlorine measurement (Cl2) 0.01…5 ppm
Chlorine dioxide measurement (ClO2) 0.005…5 ppm
Maintenance 12 months nominal, depending on the water quality

Performance data
Chlorine measurement (Cl2)
Sensitivity – 11 nA/ppm (at pH 5), – 8 nA/ppm (at pH 7)
pH compensation Yes, with MS01 sensor cube
Detailed information can be found in the data sheet of the pH sensor cube, see data sheet Type MS01  for more information
Measuring range resolution 0.01 ppm
Measurement deviation ± 0.03 ppm or ± 5 % of the measured value
Linearity ± 0.02 ppm of the measured value
Repeatability ± 0.02 ppm of the measured value
Response time (t90) < 30 s

Electrical data
Operating voltage 24 V DC through the backplane of the system Type 8905 via büS
Power consumption 0.8 VA

Medium data
Fluid Water without particles: drinking water, industrial water
pH range pH 4…pH 9
Conductivity  >50 µs/cm
Sample water
Temperature + 3…+ 40 °C (+ 37…+ 104 °F)
Pressure PN3
Flow rate  6 l/h

Process/Port connection & communication
Process connection Via pinch valve in the fluidic backplane of the Type 8905
Detailed information can be found in the data sheet of t the Online Analysis System, see data sheet Type 8905  for more information.
Electrical connection Spring contacts in the fluidic backplane of the Type 8905, which is connected to a büS System
Detailed information can be found in the data sheet of t the Online Analysis System, see data sheet Type 8905  for more information.

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th