Add to wishlist
Burkert-Type 8750 - Flow rate controller for gases

Burkert Type 8750 Flow Rate Controller for Gases

จุดเด่นของ Type 8750

  • Reliable and automated flow control on site
  • Stable control of the set point, independent on pressure fluctuations
  • Programmable alarm functions (pressure monitoring)
  • Simple start-up by manual setpoint setting and display
  • Leckage air compensation programmable for dense phase conveying systems
Send Email LINE OA
หมวดหมู่:

Flow rate controller for gases

The flow rate controller type 8750 represents a closed flow control loop to measure and control gases using the differential pressure principle. The reliable and robust system consists of an ELEMENT control valve, type 2301, the compact process controller type 8693 put on top of the valve and two pressure transmitters, type 8325. The Bürkert flow rate controller does not need a separate flow meter. The valve seat serves as variable orifice. From the pressure difference across the valve and the given density and temperature a volume flow, referring to the conditions programmed, can be calculated. For that the process controller uses the flow characteristics of the valve and the scales of the pressure transmitters programmed. The volume flow set can then be adjusted by changing the stroke of the control valve. The flow rate controller offers a high repeatability and large measuring range. Beneficial is that the control itself is used for both, controling the flow and measuring over an orifice. With the variable orifice of the control valve the measurement range is increased significantly. Low assembly costs and easy commissioning are further advantages of this unique product.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 8750

TYPE 8750 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions Detailed information can be found in chapter “4. Dimensions” on page 6.
Materials Detailed information can be found in chapter “2. Materials” on page 4.
Design Globe control valve with integrated flow measurement and control
Nominal diameter DN 15…DN 100
Port connection Flange according to DIN EN 1092 – 1, ANSI B 16.5 or JIS 10K
Safety setting in case of power failure Closed (Control function A)
Flow direction Against closing direction (under seat)
Performance data
Operating pressure Valve: 0 bar(g)…16 bar(g)
Nominal pressure (max.) PN 25 (DIN EN 1333), Class 150 (DIN EN 1759)
Pilot pressure 5.5…7 bar (actuator M, N, P, see “ELEMENT version, actuator M (70 mm), N (90 mm), P (130 mm)” on page 4)
5…6 bar (actuator L, see “CLASSIC version, actuator L (225 mm)” on page 5)
Optional on request: version for reduced control pressure from 3.5 bar
Seat leakage
acc. to DIN EN 60534 – 4		 Leakage class VI for PTFE (soft sealing)
KVS values 2.1 m³/h…140 m³/h, see “5.1. Fluidic data” on page 8
Operating characteristic Linear or equal percentage
Theoretical range ability Up to 50:1
Flow rate measurement
Measured variable Volume flow, reference conditions programmable
Measuring principle Differential pressure via orifice plate and pressure transmitter on the inlet and outlet side of the orifice plate
Pressure measurement ranges 0…100 mbar to 0…16 bar
Pressure measuring principle Piezoresistive
Pressure measuring error ≤ 0.5 % of full scale
Electrical data
Operating voltage 24 V DC ± 10 %
Max. residual ripple 0.1
Electrical connection Operating voltage: circular connector M12x1, 4 pin
Analogue input/output signals (for setpoint and actual value): circular connector M12x1, 8 pin Additionally for Bus communication: M12x1, 5 pin
Internal signals (for connecting the pressure transmitters): circular connector M8x1, 4 pin
Communication/signal interface Analogue (4…20 mA, 0…10 V) or digital (PROFIBUS DP)
Medium data
Medium Air, oxygen, nitrogen, carbon dioxide, neutral gases, fuel gases
Medium temperature – 10…80 °C
Control medium Air or neutral gases acc. to DIN ISO 8573 – 1: dust Cl. 7 (< 40 µm), particle density Cl. 5 (< 10 mg/m³), pressure dew point Cl. 3 (≤ 20 °C), oil conc. Cl. X (< 25 mg/m³)
Process/Port connection & communication
Pilot air ports Threaded connection G ⅛, stainless steel
Approvals and certificates
Approval Explosion protection: ATEX for zone 3G on request
Conformity Materials in contact with medium conform to EG1935/2004 and FDA Oxygen conformity for DN 15 (up to + 60 °C) on request
Fuel gases (seals according to EN549)
Certificate 2.2 or 3.1 certificate on request
Environment and installation
Ambient temperature 0…55 °C
Degree of protection IP65 / IP67 acc. to EN 60529

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th