Add to wishlist
Burkert-Type 8691 - Control head for decentralised automation of ELEMENT process valves

Burkert – Type 8691 Control Head for Decentralized Automation of Process Valves (Type ELEMENT)

  • Colour illuminated status display
  • Integrated pilot air duct in the actuator
  • With ATEX II cat. 3G/D / IECEx approval
  • Contact-free inductive valve position registration (Teach function)
  • Fieldbus interface AS-Interface, IO-Link or Bürkert system bus (büS)
Send Email LINE OA
หมวดหมู่: , , , , , , , , , , , ,

Control head for decentralised automation of ELEMENT process valves

The control head Type 8691 is designed for decentralized automation of ELEMENT Type 21xx pneumatic process valves. The registration of the valve position is done through a contact-free analogue sensor element, which automatically recognises and saves the valve end position through the Teach function during start-up. The integrated pilot valve controls single or double-acting actuators. As an option a communication interface, AS-Interface, IO-Link or büS (based on CANopen) can be chosen.

The design of the control head and the actuator enables an internal control air routing without external tubings. Besides the electrical position feedback, the status of the device is shown directly on the control head itself through coloured powerful LEDs, even in difficult ambient conditions.

The housing is easy to clean and features proven IP protection and chemically resistant materials for use in hygienic processing in food, beverage and pharmaceutical industries. Focused on wash down applications, the IP protection of the housing is supported by a positive pressure inside the control head. Combined with Bürkert ELEMENT actuators, the pneumatic actuating system enables spring chamber aeration that avoids actuator chamber contamination from the environment.

DOWNLOAD DATA SHEETS

Type 8691 data sheet | control head for automation of ELEMENT process valve DOWNLOAD DATASHEET
Type KK01 data sheet | adapterkits for hygienic process valves DOWNLOAD DATASHEET

Can be combined with

General Technical Data

Product properties
Profile S-B.A.E (A/B-Slave, max. 62 slaves/master) certificate no. 77601 acc. to Specification V3.0 Master class: M3, M4
S-B.F.F (standard slave, max. 31 slaves/master) Master class: M0, M1, M2, M3, M4

Electrical data
Operating voltage 26.5…31.6 V DC, UL: NEC Class 2
Via Bus cable Acc. to specification
Isolation from bus signal On request
Protection class 3 acc. to DIN EN 61140
Max. current consumption 120 mA
Current consumption in standard operation 90 mA (acc. to current reduction; valve + 1 end position achieved)
Device with external power supply External power supply (The power supply unit must contain one secured disconnection acc. to IEC 364 – 4 – 41 (PELV or SELV))
Max. current consumption 55 mA (acc. to current reduction ≤ 30 mA)
Max. current consumption from ASI 55 mA
Contact rating ≤ 1 W via AS-Interface
Watchdog function Integrated
Sensor operating voltage 24 V ± 10 % (via AS-Interface)
Current carrying capacity ≤ 50 mA short circuit proof
Switching level, high ≥ 10 V
Input current, high Limited to 6.5 mA
Input current, low ≤ 1.5 mA

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th