Add to wishlist
Burkert-Type 8026 - Insertion flowmeter with paddle wheel, ELEMENT design
Burkert-Type 8026 - Insertion flowmeter with paddle wheel, ELEMENT design
Burkert-Type 8026 - Insertion flowmeter with paddle wheel, ELEMENT design
Burkert-Type 8026 - Insertion flowmeter with paddle wheel, ELEMENT design
Burkert-Type 8026 - Insertion flowmeter with paddle wheel, ELEMENT design
Burkert-Type 8026 - Insertion flowmeter with paddle wheel, ELEMENT design

Burkert – Type 8026 – ELEMENT Design Insertion Flowmeter with Paddle Wheel

จุดเด่นของ Type 8026

  • Up to PN10, size of measurement pipes: DN 20…DN 400
  • Configurable outputs: one or two transistor output(s) and one or two 4…20 mA current output(s)
  • Automatic calibration using Teach-In, all outputs can be checked without the need for actual flow
  • Removable backlit display/configuration module for indication of flow rate and volume with two flow totalizers
Send Email LINE OA
Categories: ,

Insertion flowmeter with paddle wheel, ELEMENT design

The flowmeter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing, etc.).

Downloads

Data Sheet User Manual

TYPE 8026 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Materials Please make sure the device materials are compatible with the fluid you are using.
Detailed information can be found in chapter “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 5.
Non wetted parts
Housing Stainless steel 1.4404, PPS
Cover Polycarbonate (PC), transparent (opaque on request)
Display/configuration module PC
Navigation key PBT
Union nut PC
Seals EPDM, silicone
Screws Stainless steel 1.4401 (316 (A4))
Fixed connector holder PPS CF30
Grounding terminal and screw Stainless steel 1.4301 (304 (A2))
Wetted parts
Seal FKM standard (EPDM included, but not mounted)
Axis Ceramics (Al2O3)
Sensor armature, paddle wheel PVDF
Dimensions Detailed information can be found in chapter “4. Dimensions” on page 6.
Measuring principle Paddle wheel
Pipe diameter DN 201.)…DN 400
Compatibility Any pipe from DN 06…DN 65 which are fitted with Bürkert S030 Inline sensor-fitting.
For the selection of the nominal diameter of the Inline sensor-fittings, see data sheet Type S030.
Measuring range • Flow rate: 0.5…75000 l/min (0.13…19813 gpm)
• Flow velocity: 0.3…10 m/s
Product accessories Display/configuration module Grey dot matrix 128 x 64 with backlighting

Performance data
Measurement deviation • Teach-In: ± 1 % of the measured value1.) (at Teach-In flow rate value)
• Standard K-factor: ± 2.5 % of the measured value1.)
Repeatability ± 0.4 % of the measured value1.)
Linearity ± 0.5 % of full scale1.)
4…20 mA output uncertainty ± 1 % of range

Electrical data
Operating voltage • 2 or 3 outputs transmitter (2-wire) version: 14…36 V DC, filtered and regulated
• 4 outputs transmitter (3-wire) version: 12…36 V DC, filtered and regulated Connection to main supply: permanent (through external SELV (Safety Extra Low Volt-age) and LPS (Limited Power Source) power supply
Power source (not supplied) Limited power source according to UL/EN 60950-1 standards or limited energy circuit according to UL/EN 61010-1 §9.4
DC reverse polarity protection Yes
Overvoltage protection Yes
Current consumption With sensor
• ≤ 1 A (with transistors load)
• 2 or 3 outputs transmitter (2-wire) version: ≤ 25 mA (at 14 V DC without transistors load, with current loop)
• 4 outputs transmitter (3-wire) version: ≤ 5 mA (at 12 V DC without transistors load, without current loop)
Power consumption Max. 40 W
Outputs
Transistor		 • 1 transistor output (transmitter 2-wire):
– NPN, open collector
– 1…36 V DC
– Max. 700 mA
• 2 transistor outputs (transmitter 2 or 3-wire):
– Adjustable as sourcing or sinking (respectively both as PNP or NPN ), open collector
– Max. 700 mA
– 0.5 A max. per transistor if the 2 transistor outputs are wired
– NPN-output: 1…36 V DC
– PNP-output: Power supply
Current 4…20 mA adjustable as sourcing or sinking (in the same mode as transistor):
• 1 current output (transmitter 2-wire)
Max. loop impedance: 1100 Ω at 36 V DC; 610 Ω at 24 V DC; 180 Ω at 14 V DC
• 2 current outputs (transmitter 3-wire)
Max. loop impedance: 1100 Ω at 36 V DC; 610 Ω at 24 V DC; 100 Ω at 12 V DC
Voltage supply cable For the female M12 connector and/or the male M12 connector (not supplied, to order separately, see chapter “10.5. Ordering chart accessories” on page 11) use a shielded cable.
• Ø 3…6.5 mm
• Cross section of wires: max. 0.75 mm²

Medium data
Fluid temperature With fitting Type S020 in:
• PVC: 0…+ 50 °C (+ 32…+ 122 °F)
• PP: 0…+ 80 °C (+ 32…+ 176 °F)
• PVDF, stainless steel or brass: – 15…+ 100 °C (+ 5…+ 212 °F) See data sheet Type S020  for more information.
Fluid pressure Max. PN 10 (145 PSI)
See data sheet Type S020 for more information.
Viscosity Max. 300 cSt
Rate of solid particles Max. 1 %
Maximum particle size 0.5 mm

Process/Port connection & communication
Process connection G 2″ for use with Type S020 Insertion fitting
See data sheet Type S020 for more information.
Electrical connections • 2 or 3 outputs transmitter (2-wire) version: 1 x 5 pin M12 male fixed connector
• 4 outputs transmitter (3-wire) version: 1 x 5 pin M12 male and 1 x 5 pin M12 female fixed connectors
Approvals and certificates
Standards
Degree of protection3.)		 IP65, IP67 (according to EN60529), NEMA 4X (according to NEMA250) with device wired and M12 cable plug mounted and tightened and cover fully screwed down
CE directives The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable).
Pressure Equipment Directive Complying with Article 4, Paragraph 1 of 2014/68/EU directive
Detailed information on the pressure equipment directive can be found in chapter “2.2. Pressure Equipment Directive” on page 5.
Certification UL-Recognized for US and Canada

Environment and installation
Ambient temperature Operation and storage: – 10…+ 60 °C (+ 14…+ 140 °F)
Relative air humidity ≤ 85 %, without condensation
Height above sea level Max. 2000 m
Operating condition Continuous
Equipment mobility Fixed
Application range Indoor and outdoor (protect the device against electromagnetic interference, ultraviolet rays and against the effects of climatic conditions)
Installation category Category I according to UL/EN 61010-1
Pollution degree Degree 2 according to UL/EN 61010-1

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th