ข้ามไปยังเนื้อหา
Inline Paddle Wheel Flow Switch
The Inline flow switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/ maximum values of flow.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties |
|
|
Material
|
Please make sure the device materials are compatible with the fluid you are using. |
|
Non wetted parts – Cover material
|
PC, +20% glass fibre reinforced
|
| Non wetted parts – Housing material | PC, +20% glass fibre reinforced |
| Non wetted parts – Screw material |
Stainless steel
|
| Non wetted parts – Setting screw material | Plated brass |
| Non wetted parts – Female cable plug/male fixed plug material | Body, contact holders and cable gland in PA / Cable gland seal and flat seal in NBR |
| Wetted parts – Sensor holder material |
Brass (CuZn39Pb2), stainless steel 316L (1.4404), PVC, PP, PVDF
|
| Wetted parts – Axis material |
Stainless steel 316L
|
| Wetted parts – Blade material | PVDF |
| Wetted parts – Sensor-fitting body material |
Brass (CuZn39Pb2), stainless steel 316L (1.4404), PVC, PP, PVDF
|
| Wetted parts – Seal material | FKM (EPDM on request) |
|
Compatibility
|
Transmitter (SE10) compatible with Bürkert sensor-fitting (S010)
|
| Pipe diameter | DN 15…DN 50 |
| Dimensions | Detailed information can be found in chapter “4. Dimensions” on page 5. |
| Measuring element |
Blade with magnet, Reed contact
|
| Measuring principle | Magnetic by switching the Reed contact |
| Switching range | 4.7…75.4 l/min |
Electrical Data |
|
|
Operating voltage
|
Without
|
| Output | Reed contact: potential free, form A, switch off or switch on • switching voltage: 150 V DC/250 V AC max. • switching current: 0.8 A max. • switching power: 50 W max., 50 VA • operating current: 2.5 A |
| Recommended connection cable |
0.25…0.5 mm2 cross section; max. 100 m length
|
Medium Data |
|
|
Fluid temperature
|
With sensor-fitting in: • PVC: 0…+ 50 °C (+ 32…+ 122 °F) • PP, PVDF, stainless steel or brass : 0…+ 55 °C (+ 32…+ 131 °F) |
| Fluid pressure | • Max. PN 10 (145 PSI) with plastic sensor-fitting • Max. PN 16 (232 PSI) with metal sensor-fitting Detailed information can be found in chapter “5.1. Pressure temperature diagram” on page 9. |
|
Viscosity
|
Max. 100 cSt
|
| Rate of solid particles | Max. 1% |
| Maximum particle size | 0.5 mm |
| Flow velocity | Max. 10 m/s |
Process/Port Connection & Communication |
|
|
Port connection
|
• Metal: Internal or external thread, weld ends, clamp or flange • Plastic: True union with nut and solvent socket, external thread or spigot |
| Electrical connection | Cable plug: EN 175301-803 (provided) |
Approvals and Certificates |
|
|
CE directive
|
The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable).
|
| Pressure equipment directive | Complying with Article 4, Paragraph 1 of 2014/68/EU directive |
Environment and Installation |
|
|
Ambient temperature
|
Operation and storage: 0…+ 55 °C (+ 32…+ 131 °F)
|
| Relative air humidity | ≤80%, without condensation |
| Height above sea level | Max. 2000 m |
| Operating condition | Continuous |
| Equipment mobility | Fixed |
| Application range | Indoor and outdoor (protect the device against electromagnetic interference, ultraviolet rays and against the effects of climatic conditions) |
|
Degree of protection according to IEC/ EN 60529
|
IP65 with device wired and cable plug mounted and tightened
|
|
Installation category
|
Category I according to UL/EN 61010-1
|
| Pollution degree | Degree 2 according to UL/EN 61010-1 |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th