Add to wishlist
Burkert-Type 8006 - Mass Flow Meter (MFM)

Burkert – Type 8006 Mass Flow Meter (MFM)

จุดเด่นของ Type 8006

  • High accuracy
  • Fast response time
  • Protection class IP65
  • Optional: Fieldbus interface
  • Nominal flow ranges from 20 l/min up to 2500 l/min
Send Email LINE OA
หมวดหมู่: , ,

Mass Flow Meter (MFM)

The mass flow meter (MFM) type 8006 is suited for measuring the mass f low of high gas flows. The thermal inline sensor is located directly in the gas stream and therefore reaches very fast response times. Type 8006 can optionally be calibrated for two different gases; the user can switch between these two gases. As electrical interfaces both, analog standard signals and f ieldbuses are available. The MFM type 8006 is especially designed for use in harsh environments due to a low sensitivity to contamination and the high protection class.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 8006

TYPE 8006 สามารถใช้ได้ร่วมกับ

General Technical Data

Product Properties
Body material
Stainless steel
Housing material PC (Polycarbonate)
Seal material FKM, EPDM or FFKM
Dimensions
Standard version: 107×115.5×28 (BxHxT)
Sub-base version: 107×115.5×43 (BxHxT)
Total weight
Approx. 900 g
LED display Indication for:
1. Power; 2. Communication (only in fieldbus version), limit (only in analogue version); 3. Error

Performance Data
Operating pressure (max.)
10 bar…25 bar (N2, air, Argon) 
Response time (t95%)
<500 ms
Nominal flow range (QNom)
20…2500 lN/min2.), Reference medium N2
Measuring accuracy
±1.5% o. R.3.) ±0.3% F. S.4.)
Repeatability
±0.1% F. S.
Measuring range
1:50 (With vertical installation position with flow from top to bottom the measuring range is 1:10)

Electrical Data
Standard electrical connection
Socket M16, round, 8 pin and socket D-Sub HD15, 15 pin
Additionally for PROFIBUS DP  electrical connection M12 socket, 5 pin or D-Sub 9 pin
Additionally for CANopen electrical connection Plug M12, 5 pin or D-Sub 9 pin
 RS485 version only electrical connection Plug D-Sub 9 pin
Operating voltage
24 V DC
Power consumption (max.)
 3.5…10 W for fieldbus: 4…12.5 W (depending on version)
Residual ripple (at DC)  <2%
Voltage tolerance ±10%

Medium Data
Operating medium
Neutral, non-contaminated gases, others on request
Calibration medium
Operating gas or air with conversion factor
Temperature of gas
– 10…+ 70 °C (- 10…+ 60 °C for oxygen)

Process/Port Connection & Communication
Port connection
 G 1⁄4, G 3⁄8, G 1⁄2, G 3⁄4, G 1
NPT 1⁄4, NPT 3⁄8, NPT 1⁄2, NPT 3⁄4, NPT 1
With screw-in fitting
For more detailed information, please refer to the product enquiry form at the end of the document.
Output signal (Actual value) analogue communication
 Analogue signal version: 0…5 V, 0…10 V, 0…20 mA or 4…20 mA Field bus version: None
RS485 version (only D-Sub, 9 pin): None
Max. Current Voltage output analogue communication Analogue signal version: 10 mA
Field bus version: None
RS485 version (only D-Sub, 9 pin): None
Max. Load current output analogue communication Analogue signal version: 600 Ω
Field bus version: None
RS485 version (only D-Sub, 9 pin): None
Fieldbus option: (D-Sub HD15 covered by sealing cap), pins for analogue inputs/out- puts not assigned) Analogue signal version: None
Fieldbus version: PROFIBUS-DP, CANopen
RS485 version (only D-Sub, 9 pin): Modbus RTU (via RS interface)
Digital communication possible via adapter
 Analogue signal version: RS232 (supports Modbus RTU) RS485, RS422 or USB
Fieldbus version: None
RS485 version (only D-Sub, 9 pin): RS485, RS422
USB
Binary inputs (Default, other functions selectable)
 Analog signal version: Three: 1. not assigned / 2. not assigned/ 3. not assigned Fieldbus version: Three: 1. not assigned / 2. not assigned / 3. not assigned RS485 version (only D-Sub, 9 pin): One: not assigned
Binary inputs (Default, other functions selectable)
 Analog signal version: Two relay outputs: 1. Limit (QNom alomost reached) 2. Error (e.g. sensor fault)
Load capacity: max. 60 V, 1 A, 60 VA
Fieldbus version: Two relay outputs: 1. Limit (QNom alomost reached)
2. Error (e.g. sensor fault)
Load capacity: max. 60 V, 1 A, 60 VA
RS485 version (only D-Sub, 9 pin): One relay output: 1. Limit (QNom alomost reached) Load capacity: max. 25 V, 1 A, 25 VA

Environment and Installation
Ambient temperature
– 10…+ 45 °C (higher temperatures on request)
Installation position Horizontal or vertical
Degree of protection IP65

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th