Add to wishlist
Burkert-Type 6223 - Servo-assisted 2-way high-flow solenoid control valve
Burkert-Type 6223 - Servo-assisted 2-way high-flow solenoid control valve
Burkert-Type 6223 - Servo-assisted 2-way high-flow solenoid control valve
Burkert-Type 6223 - Servo-assisted 2-way high-flow solenoid control valve
Burkert-Type 6223 - Servo-assisted 2-way high-flow solenoid control valve
Burkert-Type 6223 - Servo-assisted 2-way high-flow solenoid control valve

Burkert – Type 6223 – Servo-Assisted 2 Way High Flow Solenoid Control Valve

จุดเด่นของ Type 6223

  • Control with PWM signal
  • Servo-assisted, tight closing valve
  • Low hysteresis and high repeatability
  • Control valve for continuous control of liquids
Send Email LINE OA
หมวดหมู่: ,

Servo-assisted 2-way high-flow solenoid control valve

The valve Type 6223 can be used for the control of larger flow quantities. Low hysteresis, high reproducibility and good response sensitivity guarantee good positioning behaviour. The valve closes tight. The push-over coil is easy to replace.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6223

TYPE 6223 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions Detailed information can be found in chapter “4. Dimensions” on page 4.
Material
Body Brass, stainless steel on request
Seal FKM, others on request

Performance data
Hysteresis < 5 %
Reproducibility < 1 % of end value
Response sensitivity < 1 % of end value
Setting range 1:10
Actuating time (10…90 %) < 200 ms
Pressure range 0,5…10 bar
Nominal operating mode 100 % continuous operation

Electrical data
Operating voltage 24 V DC (12 V on request)
Power consumption Detailed information can be found in chapter “6.4. Ordering chart” on page 8.
Maximum coil current Detailed information can be found in chapter “6.4. Ordering chart” on page 8.
PWM frequency 280 Hz

Medium data
Medium Neutral liquids
Mediumtemperature – 10 °C…+ 90 °C
Viscosity (max.) Maximum 21 mm2/s (21 cSt)

Process/Port connection & communication
Port connection size G ⅜, G ½, G ¾, G 1
Electrical connection Cable plug Type 2518 acc. to DIN EN 175301 – 803 form A
Detailed information can be found in chapter “Cable plug Type 2518, Form A accord-ing to DIN EN 175301 – 803” on page 9.

Approvals and certificates
Degree of protection IP65

Environment and installation
Installation position Any, preferably actuator face up
Ambient temperature Maximum + 55 °C
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th