Add to wishlist
Burkert Thailand - Type 6211 Diaphragm valve 2/2 way servo-assisted

BURKERT – TYPE 6211 2/2 Way Servo-Assisted Diaphragm Valve

  • Body in brass
  • Pressure range 0.5 up to 10 bar
  • Push-over solenoid system AC07
  • Energy-saving AC07 coil, max. DN 20
Send Email LINE OA
หมวดหมู่: , , ,

Diaphragm valve 2/2 way servo-assisted

BURKERT – TYPE 6211 is a servo-assisted normally closed 2/2-way solenoid valve with a servo diaphragm for use especially with neutral fluids and gaseous media. The valve has a low power consumption, low weight and a compact body. BURKERT – TYPE 6211 is normally closed by spring force. Energized, the solenoid opens the pilot valve first. Then the medium pressure opens the main valve due to the pressure drop above the diaphragm. The valve opens.The special design and geometry of the inner parts of the valve result in a soft closing function and cause almost no water hammer.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6211

BURKERT TYPE 6211 สามารถใช้ได้ร่วมกับ

General Technical Data | Burkert - Type 6211

Product Properties

Dimensions
Detailed information can be found in chapter “4. Dimensions” on page 5. 
Seal Material
NBR, EPDM, FKM
Body Material
Brass acc. to DIN 50930-6
Cover Material
PPE/PA
Weight
Detailed information can be found in chapter “5.1. Power consumption” on page 6.
Switching Function
Detailed information can be found in chapter “2. Circuit functions” on page 3. 
Thermal insulation class of solenoid coil – Polyamide Coil
 Cable plug Form C – class B
Thermal insulation class of solenoid coil – Epoxy Coil
Cable plug Form B – class H, flying leads

Electrical Data

Operating voltage
24 V DC / 24 / 110 / 230 V / 50…60 Hz
Voltage tolerance
±10%
Duty cycle
100% continuous rating
Power consumption 4W
Inrush
9 VA AC, 4 W DC (warm), 5 W (kalt)
Hold 6 VA AC, 4 W DC

Medium Data

Medium temperature with NBR
0 °C…+ 70 °C
Medium temperature with EPDM
– 10 °C…+ 70 °C
Medium temperature with FKM
0 °C…+ 70 °C
Operating medium with NBR
Neutral gases and fluids (e.g. compressed air, water, hydraulic oil, oil, fat without additives)
Operating medium with EPDM
Oil and fat-free medium (e.g. alkaline washing and bleaching lyes)
Operating medium with FKM
Per-solutions, oils with additives

Process / Port Connection & Communication

Port connection
G 3⁄8 … G 1 (NPT or RC on request)
Electrical connection
Tag connector sidewards: acc. to DIN EN 175301-803 Form C for cable plug Type 2516 / acc. to DIN 43650 Form B (industrial standard) for cable plug Type 2507

Environment and Installation

Installation position
As required, preferably with actuator upright
Ambient temperature
Max. + 55 °C
Degree of protection
IP65 with cable plug

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th