Add to wishlist
3/2-way flipper solenoid valve, direct-acting
3/2-way flipper solenoid valve, direct-acting

Burkert – Type 6144 – 3/2 way flipper solenoid valve, direct-acting

จุดเด่นของ Type 6144

  • 0 to 10 bar
  • Direct-acting
  • Standard, Ex ia version
  • Low power consumption
  • 10 mm installation width / 11 mm width/station
Send Email LINE OA
หมวดหมู่: ,

3/2-way flipper solenoid valve direct-acting

Type 6144 is a direct-acting 3/2-way solenoid valve designed for neutral gases and liquids. Through the movement between the two end positions, the switching element (flipper) seals one of the two opposing valve seats and connects the other to the working port. This movement is caused by the magnetic field pushing a permanent magnet, which is fixed to the flipper element, when switching the solenoid. In addition to its exceptional performance characteristics, the flipper principle is especially marked by its very low switching noise and low wear level. Furthermore, integrated medium separation enables use above and beyond pneumatic applications. Depending on the application, various flange connections are available that are suitable for both individual and block installation. Installation advice: The valve must be at least 5 mm away from other ferromagnetic materials in order to avoid malfunctioning during operation.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6144

BURKERT TYPE 6144 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions Detailed information can be found in chapter “5. Dimensions” on page 6.
Material
Seal FKM (other materials on request)
Fluid housing PPS
Orifice DN 0.6
Circuit function Monostable
Detailed information can be found in chapter “3. Circuit functions” on page 5.

Performance data
Nominal operating mode Continuous operation 100 %
Switching times Opening: approx. 8 ms (pressure rise 0…10 %)
Closing: approx. 10 ms (pressure drop 100…90 %)
Explosion-proof version Opening: approx. 14 ms (pressure rise 0…10 %)
Closing: approx. 18 ms (pressure drop 100…90 %)

Electrical data
Electrical control With SPS possible
Operating voltage 24 V DC, 12 V DC (further voltages on request)
Voltage tolerance ± 10 %
Switching frequency approx. 17 Hz
Nominal power 0.8 W

Medium data
Medium temperature – 10 °C…+ 55 °C
Operating medium Compressed air lubricated, oil-free or dry, neutral gases and liquids (5 μm filtering) See chapter “4.1. Chemical Resistance Chart – Bürkert resistApp” on page 5

Process/Port connection & communication
Port connection Bürkert flange (10 x 18 mm)
Bürkert flange vertical (10 x 32 mm) Bürkert flange lateral (10 x 42 mm) Bürkert flange horizontal (26 x 41 mm) UNF ¼”- 28
Hose connector
Electrical connection Rectangular plug Type 2505
2 FEP-flying leads 0.2 mm², AWG 24, length 500 mm
(round plug M8 x 1 or PCB plug RM 5.08 mm on request)

Approvals and certificates
Type of protection Standard version Explosion-proof version Without
PTB 07 ATEX 2048 X, II 2G Ex ia IIC T4…T6 Gb IECEx PTB 07.0063X, Ex ia IIC T4…T6 Gb
Protection class 3 acc. VDE 0580
Degree of protection IP30
IP65 with flying leads

Environment and installation
Installation position As required, preferably with actuator upright
(5 mm minimum distance to ferromagnetic materials)
Ambient temperature – 10 °C…+ 55 °C
Minimum bending radius for flying leads version Single bending: 8.5 mm radius
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th