Add to wishlist
Burkert - Rocker-Solenoid Valve with separating diaphragm

Burkert – Type 6126 – 2/2 or 3/2 Way Rocker Solenoid Valve with Separating Diaphragm

จุดเด่นของ Type 6126

  • With isolating diaphragm
  • Flexible design for custom manifold assemblies
  • Normally closed, normally open and universal function
  • Compact design with 16 mm width and Cv ratings up to 0.058
  • High back pressure tightness, excellent cleanability and 100 % duty cycle
Send Email LINE OA
หมวดหมู่: ,

2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched. The medium is in contact exclusively with the housing material and the FKM seals. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate. The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6126

BURKERT TYPE 6126 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions Detailed information can be found in chapter “4. Dimensions” on page 5.
Material
Fluid housing PPS
Seal FKM, EPDM
Internal volume Sub-base: starting at 44 µl  < 10 µl available on request
Orifice DN0.8…DN1.6

Performance data
Response times Open: ca. 25 ms (Pressure rise 0…10 %)
Closing: ca. 25 ms (Pressure drop 100…90 %)
Electrical data
Operating voltage 12/24 V DC, other voltages are available on request
Voltage tolerance ± 10 %
Power consumption 3.4 W
Duty cycle 100 % continuous rating
Manifold mounting: If media or ambient temperatures are above + 40 ºC: intermittent operation 40 % (minimum 10 min)

Medium data
Media Resistant to neutral and aggressive liquids and gases
Medium temperature  – 10…55 °C
Viskosität (max.) 21 mm2/s

Process/Port connection & communication
Port connection Bürkert sub-base (16 × 27 mm)
Electrical connection Plug-in connection C acc. to DIN EN 175301 – 803 for cable plug Type 2516 top/lateral
2 FEP-leads, AWG 24, length 500 mm
Rectangular cable plug, Type 2505

Approvals and certificates
Protection class IP65 with flying leads or cable plug Type 2516 IP30 with Rectangular plug Type 2505

Environment and installation
Installation position As required, preferably with actuator upright
Ambient temperature (max.) 55 °C
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th