Burkert - Rocker-Solenoid Valve with separating diaphragm

Burkert – Type 6126 – 2/2 or 3/2 Way Rocker Solenoid Valve with Separating Diaphragm

จุดเด่นของ Type 6126

With isolating diaphragm
Flexible design for custom manifold assemblies
Normally closed, normally open and universal function
Compact design with 16 mm width and Cv ratings up to 0.058
High back pressure tightness, excellent cleanability and 100 % duty cycle

หมวดหมู่: 2/2 and 3/2 way micro Solenoid Valves, Microfluidic Valves

คำอธิบาย

2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched. The medium is in contact exclusively with the housing material and the FKM seals. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate. The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6126

BURKERT TYPE 6126 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions	Detailed information can be found in chapter “4. Dimensions” on page 5.
Material
Fluid housing	PPS
Seal	FKM, EPDM
Internal volume	Sub-base: starting at 44 µl < 10 µl available on request
Orifice	DN0.8…DN1.6
Performance data
Response times	Open: ca. 25 ms (Pressure rise 0…10 %) Closing: ca. 25 ms (Pressure drop 100…90 %)
Electrical data
Operating voltage	12/24 V DC, other voltages are available on request
Voltage tolerance	± 10 %
Power consumption	3.4 W
Duty cycle	100 % continuous rating Manifold mounting: If media or ambient temperatures are above + 40 ºC: intermittent operation 40 % (minimum 10 min)
Medium data
Media	Resistant to neutral and aggressive liquids and gases
Medium temperature	– 10…55 °C
Viskosität (max.)	21 mm2/s
Process/Port connection & communication
Port connection	Bürkert sub-base (16 × 27 mm)
Electrical connection	Plug-in connection C acc. to DIN EN 175301 – 803 for cable plug Type 2516 top/lateral 2 FEP-leads, AWG 24, length 500 mm Rectangular cable plug, Type 2505
Approvals and certificates
Protection class	IP65 with flying leads or cable plug Type 2516 IP30 with Rectangular plug Type 2505
Environment and installation
Installation position	As required, preferably with actuator upright
Ambient temperature (max.)	55 °C

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.