ข้ามไปยังเนื้อหา
Plunger valve 2/2 way direct-acting
The type 6011 is only available until 6/30/26.
The successor types are (can be a little different because of the update): 7011
Please contact us for a consultation regarding the most suitable successor article for your requirements.
Valve 6011 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. In combination with a cable plug in accordance with industry standard Form B or DIN EN 175301-803 Form C, the valves satisfy protection class IP65.
BURKERT TYPE 6011 สามารถใช้ได้ร่วมกับ
-
Burkert - Type 2507 - Industry Standard Cable Plug Form B
-
BURKERT - TYPE 2516 Cable Plug DIN EN 175301 803 Form C
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data | Burkert - Type 6011
Product Properties
| Dimensions | Detailed information can be found in chapter “4. Dimensions” on page 5. |
|
Seal Material
|
FKM |
| Body Material |
Standard version: Brass, polyamide (PA), stainless steel 1.4305 / Analytical version: Brass, stainless steel 1.4305
|
| Weight | Ca. 125 g |
Performance Data
| Duty cycle/single valve when mounted as a block on a manifold | 100 % continuous rating / Intermittent operation 60 % (30 min) or with 2 W coil (on request) |
| Circuit function | A |
Electrical Data
| Operating voltage – Standard version |
24 V DC, 24 V/50 Hz, 110/230 V/50 Hz
|
|
Operating voltage – Analytical version
|
24 V DC, 230 V/50 Hz
|
|
Voltage tolerance
|
±10%
|
Medium Data
| Medium – Standard version |
Technical vacuum, neutral gases and fluids (e.g. compressed air, water, hydraulic oil)
|
| Medium – Analytical version |
Neutral/aggressive medium that do not attack the body and seal materials
|
|
Viscosity
|
Max. 21 mm2/s
|
|
Medium temperature
|
– 10…+ 100 °C
|
Approvals and Certificates
| Degree of protection |
IP65 with cable plug
|
Process / Port Connection & Communication
| Port connection – Standard version |
M5, G 1⁄8, sub-base
|
|
Port connection – Analytical version
|
G 1⁄8, sub-base
|
|
Electrical connection
|
DIN EN 175 301 – 803 Form C for cable plug Type 2516 / Industry standard connector Form B for cable plug Type 2507
|
Environment and Installation
| Installation position |
As required, preferably with actuator upright
|
|
Ambient temperature (max.)
|
+ 55 °C
|
|
Installation instructions
|
No oil, grease or silicones to be used as installation aids
|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th