Servo-assisted 2/2-way Diaphragm valve
วาล์วโซลินอยด์ Bürkert รุ่น 5282 ถูกออกแบบมาเพื่อให้มีอายุการใช้งานที่ยาวนาน ด้วยคุณสมบัติการแยกสื่อ นอกจากนี้ วาล์วยังมีคุณสมบัติมาตรฐาน เช่น การปรับเปลี่ยนแบบแมนนวล และเวลาในการเปิด-ปิดที่สามารถปรับได้ ฟังก์ชันวงจรของวาล์วสามารถเปลี่ยนจาก NC ไปเป็น NO ได้อย่างง่ายดาย เพียงแค่หมุนวาล์วนำร่อง 3/2 ทางที่ด้านบนของตัววาล์วหลัก วาล์วรุ่น 5282 มีให้เลือกหลายแบบ ทั้งตัวเรือนและวัสดุปิดผนึก โดยตัวเรือนทองเหลืองได้รับการรับรองตามมาตรฐานน้ำดื่มของยุโรป และยังมีเวอร์ชัน ATEX หลายเวอร์ชันสำหรับใช้ในสภาพแวดล้อมที่มีความเสี่ยงต่อการระเบิด
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 5282 สามารถใช้ได้ร่วมกับ
General Technical Data | Burkert - Type 2000
Product characteristics | ||
Dimensions | Detailed information can be found in chapter “5. Dimensions” on page 5. | |
Material | ||
Threaded body | Brass according to DIN EN 50930 − 6 DN 13 stainless steel CF3M DN 20…DN 50 stainless steel 1.4581 | |
Flange body | Stainless steel 1.4581 | |
Internal valve parts | Stainless steel, brass | |
Coil | Epoxide | |
Seal | NBR, EPDM, FKM | |
Nominal diameter | DN 13…DN 65 | |
Switching function | Detailed information can be found in chapter “2. Circuit functions” on page 4. | |
Thermal insulation class of solenoid coil | H | |
Performance data | ||
Nominal operating mode | Continuous operation 100 % duty cycle | |
Switching times1.) | Opening: 0.1…0.8 sec. Closing: 1.0…4.0 sec. | |
Electrical data | ||
Operating voltage | 024/DC, 024/56, 230/56, 024/UC, 230/UC | |
Voltage tolerance | ± 10 % | |
Electrical power consumption | ||
Standard | Inrush AC 24 VA Operation AC 14/8 VA W DC cold/hot 11/8 W | |
Ex | Inrush AC 40 VA Operation AC 3 VA W DC cold/hot 40 W inrush / 3 W operation | |
Medium data | ||
Operating medium NBR NBR EPDM FKM | Neutral media, e.g. compressed air, water, hydraulic oil Oil and grease-free media, alkalis, hot water Hot air, per solutions, hot oils | |
Medium temperature NBR EPDM FKM | 0 °C…+ 80 °C - 25 °C…+ 90 °C 0 °C…+ 90 °C | |
Process/Port connection & communication | ||
Electrical connection | ||
Standard | Plug tabs according to DIN EN 175301 - 803 Form A for cable plug Type 2518 | |
Ex | With moulded cable 3 m long, 3 × 0.5 mm2 With moulded cable 3 m long, 3 × 0.5 mWith terminal box | |
Approvals and certificates | ||
Guidelines | CE, EAC | |
Degree of protection | IP65 with cable plug according to DIN EN 175301 - 803 Form A IP65 with cable connection or terminal box | |
Environment and installation | ||
Ambient temperature | Max. + 55 °C | |
Installation position | Any, preferably actuator face up |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th