Burkert – Type 3360 – 2/2 Way Electromotive Angle Seat Control Valve

จุดเด่นของ Type 3360

Good and fast control
Weather, impact and vibration resistant design
Position controller and process controller available
Easy cleaning by its design according hygienic demands

Send Email LINE OA

หมวดหมู่: Angle Seat Valves, Angle Seat Valves, Angle Seat Valves, BURKERT PROFINET, Control Valves, EDIP, EDIP Capable Products, Electromotive Valves, EtherNet/IP, Industrial Communication, Process and Control valves, Shut-off valves(on-off), วาล์วควบคุม (Solenoid Valve Process and Control Valve)

คำอธิบาย

Electromotive 2 way angle seat control valve

The innovative process controller Bürkert valve Type 3360 is the solution when it comes to control tasks under demanding operating conditions.

The electromotive actuator with ball screw positions the control cone with highest precision. A unique feature is its high positioning speed of 6 mm/s, that reacts quasi delay-free to process signals, and can be varied according to customer demands. Pressure variations or shocks in the medium aren´t transferred to the valve position. If necessary, the safety position can be approached by an optional energy storage in case of power failure.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 3360

BURKERT TYPE 3360 สามารถใช้ได้ร่วมกับ

General Technical Data

Product Properties
Dimensions	Detailed information can be found in chapter “4. Dimensions” on page 7.
Material	Detailed information can be found in chapter “3. Materials” on page 5.
Design	Angle seat control valve
Nominal diameter	DN15…50, NPS 1⁄2…2
Safety setting in case of power failure	With SAFEPOS energy-pack: open, closed or freely programmable Without SAFEPOS energy-pack: blocked in last position
Flow direction	Against closing direction (below seat)
Controller versions	Position controller or process controller (optional)
Weight	4 kg (only actuator, total weight depends on the port connection)
Performance Data
Operating pressure	0…25 bar(g) (see “5.1. Fluidic data” on page 12) / Vacuum version up to – 0.9 bar(g) (optional)
Nominal pressure	PN25 (DIN EN 1333), Class 150 (DIN EN 1759)
KVS value	5…53 m3/h (see “5.1. Fluidic data” on page 12)
Flow characteristic	Modified equal percentage (see “5.1. Fluidic data” on page 12)
Seat leakage (DIN EN 60534 – 4)	Class III, IV and VI (see “5.1. Fluidic data” on page 12)
Closing time	2.3…6.2 s (depending on travel speed and stroke) 6 mm/s (for actuator force 1300 N)
Travel speed	6 mm/s (for actuator force 1300 N)
Dead band of the position contro	±0.1%
Electrical Data
Operating voltage	24 V DC±10% (max. residual ripple 10%)
Operating current	Max. 3 A (at max. load and including 1 A charging current of the optional SAFEPOS energy-pack) / At minimum operating temperature additionally 2 A
Protection class (DIN EN 61140)	3
Duty cycle	100%
Standby consumption	2…5 W
Standard signal (analogue)	Setpoint: 0/4…20 mA, 0…5/10 V and binary input (further inputs and outputs optional, see “5.3. Electrical control and interfaces” on page 16)
Fieldbus (digital)	Bürkert system bus (büS) / CANopen (optional) EtherNet/IP, PROFINET, Modbus/TCP (optional via integrated gateway)
Electrical Data
Process medium	Steam, neutral gases, water, alcohols, oils, fuels, hydraulic fluids, salt solutions, lyes, organic solvents, oxygen (optional)
Medium temperature	– 40 °C…+ 230 °C (see “5.2. Operating limits” on page 13)
Viscosity	Up to 600 mm2/s
Process/Port Connection & Communication
Welded port connection	DIN EN ISO 1127/ISO 4200/DIN11866 B DIN / 11850 2/DIN 11866 A/ ASME BPE/DIN 11866 C SMS 3008
Clamp port connection	DIN 32676 B (pipe ISO 4200) / DIN 32676 A (pipe DIN 11850 2) / ASME BPE
Threaded port connection	G (EN ISO 228−1) / Rc (ISO 7/1 /DIN EN 10226−2) / NPT (ASME B 1.20.1)
Actuator electrical connection	Terminal connector with cable gland, 3 x M20 or 2 M12 circular plugs, 5 pin and 8 pin, 1 M12 circular socket, 5 pin (only with process con- troller function)
Fieldbus gateway electrical connection	2 M12 circular sockets, 4 pin (only with Industrial Ethernets)
Approvals and Certificates
Conformity	Food EGV 1935/2004 / FDA (optional)
Approval	Explosion protection ATEX/IECEx (optional) (see “2. Approvals” on page 4) cULus Cert. No. 238179 (optional) (see “2. Approvals” on page 4)
Ignition protection class	II 3G Ex ec IIC T4 Gc / II 3D Ex tc IIIC T135 °C Dc
Environment and Installation
Ambient temperature	– 25…+ 65 °C (only without additional modules) / (Derating see “Operating limits for ambient and meedium temperature” on page 14)
Degree of protection	(Derating see “Operating limits for ambient and medium temperature” on page 14)
Vibration, sinusoidal resistance	5 g (IEC 60068-2-6 Test Fc)
Shock, mechanical resistance	50 g (IEC 60068-2-27 Test Ea)
	Any, preferably actuator face up

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.