Add to wishlist
Burkert - Type 3285 - 2/2 Way Motor Driven Proportional Valve
Burkert - Type 3285 - 2/2 Way Motor Driven Proportional Valve - Image 2
Burkert - Type 3285 - 2/2 Way Motor Driven Proportional Valve - Image 3
Burkert - Type 3285 - 2/2 Way Motor Driven Proportional Valve - Image 4

Burkert – Type 3285 – 2/2 Way Motor Driven Proportional Valve

  • Orifice sizes 8 to 25 mm
  • Low power consumption
  • Actuator isolated from flow path
  • Excellent range and fast response times
  • Versions: Standard, positioner, process controller
Send Email LINE OA
หมวดหมู่: , , , , , , , , , , ,

2/2 way Proportional Valve (motor-driven)

The direct-acting motor valve of type 3285 is used for dosing of liquids and gases in closed or open control loops. The valve features a stepper motor as the actuator. The integrated electronics simplifies the process integration; additional actuation modules are not necessary. The motor’s power consumption to hold a specific opening position of the valve is zero. This key feature can reduce the energy consumption of a plant dramatically and thus make it more efficient. Type 3285 is available as a standard ON/OFF or proportional valve, as a version with integrated positioner and as a version with integrated process controller.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 3285

BURKERT TYPE 3280 สามารถใช้ได้ร่วมกับ

General Technical Data

Product Properties
Dimensions
Detailed information can be found in chapter “3. Dimensions” on page 5. 
Fluid body material Brass or stainless steel
Valve body material PC (Polycarbonate), PPS (Polyphenylene sulfide)
Seal material NBR for liquids, EPDM for liquids and special gases (e. g. ammonia, acetylene), FKM for neutral gases
Seat sealing material
Technical ceramics
Weight
~ 800 g (DN 8) … 1500 g (DN 25)
Status Display
LED (Detailed information can be found in the instruction manual)

Performance Data
Nominal operating mode
Up to 100 % (depending on fluid and ambient temperature)
Typical values of positioning behaviour: Hysteresis
<5% of end value
Typical values of positioning behaviour: Response sensitivity
<1% of end value
Typical values of positioning behaviour: Setting range
1:100
Repeatability
< ±2%
Pressure range
 0…6 bar (see “5.2. Pressure range” on page 9) 
Closing time
Ca. 4 s

Electrical Data
Operating voltage
24 V DC ±10% (max. residual ripple 10%)
Power consumption
<1 W in holding position / Max. 12 W (depending on motor control)

Medium Data
Operating medium
Neutral gases, liquids
Medium temperature
0 °C…70 °C
Viscosity (max.)
80 mm2/s (cSt)

Process/Port Connection & Communication
Port connection size
G 1⁄2, G 3⁄4, G 1, NPT 1⁄2, NPT 3⁄4, NPT 1

Environment and Installation
Installation position
As required, preferably with actuator upright
Ambient temperature
– 10 °C…+ 60 °C
Degree of protection IP50

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th