ข้ามไปยังเนื้อหา
Direct-acting 2-way standard solenoid control valve
The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops. Due to an elastomeric seat seal the valve closes tight (integrated shut-off function), up to the DN specific nominal pressure. The plunger of the valve is assembled frictionless, which leads to an extraordinary adjustment characteristic. This valve is particularly suitable for demanding control tasks (high control range, dry gases, etc.).
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
TYPE 2873 สามารถใช้ได้ร่วมกับ
-
Burkert - Type 8605 - PWM Control Electronics for Electromagnetic Proportional Valves
-
Burkert - Type 2518 Cable Plug DIN EN 175301 803 Form A
-
Burkert - Universal Process Controller Type 8611
General Technical Data
Product properties |
|
| Dimensions | Detailed information can be found in chapter “5. Dimensions” on page 5. |
| Material | |
| Body | Brass, stainless steel |
| Seal | FKM, EPDM |
Performance data |
|
| Hysteresis | < 5 % |
| Reproducibility | < 0.5% of end value |
| Response sensitivity | < 0.25 % of end value |
| Setting range | 1:200 |
| Actuating time (10…90 | < 20 ms |
| Pressure range3 | 0…16 bar |
| Nominal operating mode | 100 % continuous operation |
Electrical data |
|
| Operating voltage | 24 V DC (at 5 W and 24 V coil) (12 V on request) |
| Power consumption | Maximum 9 W |
| Maximum coil current | 420 mA (at 9 W and 24 V coil) |
| PWM frequency | 1200 Hz |
Medium data |
|
| Operating medium | Neutral gases, liquids on request |
| Medium temperature | – 10 °C…+ 90 °C (with FKM) – 30 °C…+ 90 °C (with EPDM) |
| Viscosity | Maximum 21 mm2/s (21 cSt) |
Process/Port connection & communication |
|
| Port connection size | Sub-base, G ⅜, G ½, NPT ⅜, NPT ½ |
| Electrical connection | Cable plug Type 2518 acc. to DIN EN 175301 – 803 form A Detailed information can be found in chapter “Cable plug Type 2518, Form A accord-ing to DIN EN 175301 – 803” on page 13. |
Approvals and certificates |
|
| Degree of protection | IP65 |
Environment and installation |
|
| Installation position | Any, preferably actuator face up |
| Ambient temperature | Maximum + 55 °C |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th