Add to wishlist
Burkert-Type 2863 - Direct acting 2-way basic proportional valve
Burkert-Type 2863 - Direct acting 2-way basic proportional valve-02
Burkert-Type 2863 - Direct acting 2-way basic proportional valve-01
Burkert-Type 2863 - Direct acting 2-way basic proportional valve-03
Burkert-Type 2863 - Direct acting 2-way basic proportional valve
Burkert-Type 2863 - Direct acting 2-way basic proportional valve-02
Burkert-Type 2863 - Direct acting 2-way basic proportional valve-01
Burkert-Type 2863 - Direct acting 2-way basic proportional valve-03

Burkert – Type 2863 – 2 Way Direct-Acting Basic Proportional Valve

  • Good range
  • High dynamics
  • Orifice sizes DN 0.8 … 4.0 mm
  • Optional: Explosion-protected coil
Send Email LINE OA
หมวดหมู่: ,

Direct acting 2-way basic proportional valve

Type 2863 is an extremely compact solenoid control valve and is available with an orifice up to 4mm. It is based on the standard version of Type 2873. It is used as an actuator in closed control loops (pressure, flow, temperature, etc.). Compared with the standard version, the valve is essentially of simpler construction and assembly and testing procedures are optimized, easing high volume series production with shorter delivery times.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 2863

TYPE 2863 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions Detailed information can be found in chapter “5. Dimensions” on page 5.
Material
Body Brass, stainless steel
Seal FKM, EPDM

Performance data
Hysteresis < 5 %
Reproducibility < 1 % of end value
Response sensitivity < 1 % of end value
Setting range 1:25
Pressure range 0…16 bar
Nominal operating mode 100 % continuous operation

Electrical data
Operating voltage 24 V DC (12 V on request)
Power consumption Maximal 9 W
Maximum coil current 420 mA (at 9 W and 24 V coil)
PWM frequency 400 Hz

Medium data
Operating medium Neutral gases, liquids on request
Medium temperature – 10 °C…+ 90 °C (with FKM)
– 30 °C…+ 90 °C (with EPDM)
Viscosity 21 mm2/s (21 cSt)

Process/Port connection & communication
Port connection size Sub-base, G ⅛, G ¼, NPT ⅛, NPT ¼
Electrical connection Cable plug Type 2518 acc. to DIN EN 175301 – 803 form A
Detailed information can be found in chapter “Cable plug Type 2518, Form A accord-ing to DIN EN 175301 – 803” on page 10.

Approvals and certificates
Degree of protection IP65

Environment and installation
Installation position Any, preferably actuator face up
Ambient temperature Maximum + 55 °C
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th