2 Way Pneumatically Operated Globe Control Valve
The 2712 system has been specifically engineered for reliable control in applications where control accuracy is paramount. The 2712 is made from an all stainless steel valve body combined with Burkert’s classic pneumatic actuator. Each globe valve body can be fitted with three to five sizes of trim sets. These parabolic trims provide a reliable and repeatable characteristic to vary the flow. The control cones are available in either stainless steel or with a durable PTFE seal for tight shut-off. When actuated by the 8635 SideControl, SideControls 8792/93 Remote versionsor the 8694/8692/8693/ 8630 TopControl it forms a unique control valve system which can be operated as either a simple accurate positioner or an autotune PID process controllerfor flow, temperature or pressure. The actuator sizes F (80mm) to H (125mm) of Type 2712 are not available anymore since July 2020. The successor type is 2301
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product properties |
|
Dimensions | Detailed information can be found in chapter “6. Dimensions” on page 7. |
Material | Detailed information can be found in chapter “5. Materials” on page 5. |
Design | Globe control valve |
Nominal diameter | DN10…DN100, NPS ⅜…NPS 4 |
Safety setting in case of power failure | Normally closed (control function A), normally open (control function B) |
Flow direction | Flow to open (below seat) |
Performance data |
|
Operating pressure | 0 bar(g) … 25 bar(g), vacuum version up to – 0.9 bar(g) (Option) see “7.1. Fluidic data” on page 13 |
Nominal pressure | PN25 (DIN EN 1333), Class 150 (DIN EN 1759) |
Seat leakage acc. to DIN EN 60534-4:2006 |
Leakage class III and IV for stainless steel Leakage class VI for PTFE and PEEK (see “7.1. Fluidic data” on page 13) |
KV value | 0.1 m³/h…140 m³/h, see “7.1. Fluidic data” on page 13 |
Operating characteristic | Linear or equal percentage |
Theoretical rangeability | Up to 50:1 |
Medium data |
|
Medium | Steam, water, neutral gases, alcohol, oils, fuels, hydraulic fluids, salt solution, alkali solutions, organic solvents, for fuel gases of category I, II and III acc. to Gas Appliances Regulation (EU) 2016/426 and oxygen |
Medium temperature | – 40 °C…230 °C, see “7.2. Operating limits” on page 16 |
Viscosity | Max. 600 mm2/s |
Control medium | Air, neutral gases |
Process/Port connection & communication |
|
Flange connection | DIN EN 1092-1 ANSI B 16.5 JIS 10K |
Threaded connection | G (DIN ISO 228-1) NPT (ASME B1.20.1) Rc (ISO 7-1) |
Welded connection | DIN EN ISO 1127 / ISO 4200 / DIN11866 B DIN 11850 2 / DIN 11866 A ASME BPE / DIN 11866 C SMS 3008 |
Clamp connection | DIN 32676 B (pipe ISO 4200) DIN 32676 A (pipe DIN 11850 2) ASME BPE |
Approvals and certificates |
|
Conformity | Food contact 1935/2004(EG), FDA Drinking water Pressure Equipment Directive Gas Appliances Regulation Machinery Directive |
Approvals | Explosion proof ATEX / IECex |
Material certificate | 2.2, 3.1 |
Environment and installation |
|
Degree of protection | IP65/67 |
Installation position | As required, preferably with actuator upright |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th