Add to wishlist

Burkert – Type 2664 – 2/2 Way Ball Valve with Electrically Driven Actuator

จุดเด่นของ Type 2664

  • 2-Part or 3-Part ball valve
  • Manual override and optical position indicator
  • Can be used for a wide range of applications with neutral and aggressive media
Send Email LINE OA
หมวดหมู่: , , , , , , ,

2/2 way ball valves with electrically driven actuator

The motorized ball valve Type 2664 consists of a brass or stainless steel body and a motor drive with manual override and optical position indicator. The motor drive is connected to the ball valve via the mechanical interface F03 according to DIN ISO 5211. The ball valve works according to 2-position operation. The voltage is switched using a cam disc and two microswitches. The motor drive moves the ball valve by 90° and thus opens or closes the line cross-section. In the version with a potentiometer, specified intermediate positions are possible. Microswitches or potentiometers can also be used for electrical position feedback. The valve body is supplied in two or three parts. With the three-part design, the center part of the ball valve can be easily removed from the  system.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

TYPE 2664

General Technical Data

Housing material

 MS nickel-plated or VA 1.4408

Motor drive material

 PA

Sealing material

 PTFE

Media

 Gaseous and liquid (Media that do not harm housing and sealing materials)

Media temperature

 0 to +80 °C

Ambient temperature

 0 to +50 °C

Viscosity line connection
Max. 40 mm2/s

Line connection
G 1/4 bis G 1

Housing type

 2-part or 3-part

Housing design

 Manual override and optical position indicator

Operating voltage

 24 V DC or 230 V AC

Voltage tolerance
±10 %

Power consumption
5,5 W oder 2,3 W

Rated current

 230 mA at 24 V DC
10 mA at 230 V AC

Motor voltage

 24 V DC ± 10%

Drive torque

 9 Nm at 24 V DC

Nominal operating mode

 Intermittent duty ED 50% (cycle time 5 min)

Setting direction

 Adjustable with polarity

Actuating time for 90°

 14 s

Electrical connection

 7-pin circular connector according to DIN 43651

Motor drive design

 With microswitches or potentiometer 1 kΩ

Degree of protection

 IP 65 with junction box

Mounting position

 Any, preferably in an upright position

Connection drive with ball valve

 Interface F03 according to DIN ISO 5211, 9 mm

Pressure specifications [bar]

 Overpressure to atmospheric pressure

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th