ข้ามไปยังเนื้อหา
Type 0253 is a 2/2 normally-closed plunger-type solenoid valve. When energized, the solenoid armature is pulled-in against a spring and the valve opens. Direct-acting, G 1/4 As a standard feature, the valve seat is made of stainless steel in order to avoid erosion.The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties
| Circuit Function |
2/2-way valve, normally closed
|
| Body Material |
Brass body, seat 1.4305 (DN 2), 1.4112 (DN 3) Valve internals 1.4105, 1.4571
|
Operating Data (Valve)
| PTFE |
Hot water, steam alkaline washing and bleaching lyes, hot oils, carbon hydroxide, – 40 to +180 °C
|
|
Max. ambient temperature
|
55 °C |
|
Max. viscosity
|
21 mm2/s
|
|
Response times
|
Opening: 20 ms / Closing: 30 ms |
| Port Connection | G 1/4 |
*Times measured at the outlet port A on energizing/de-energizing until attainment of pressure rise to 90 % / pressure drop to 10 % at a working pressure of 6 bar.
Operating Data (Actuator)
| Operating voltages |
24, 110, 230, 240 V/50 Hz / 24 V/=
|
|
Voltage tolerance
|
±10 %
|
|
Power consumption
|
AC 21 VA (inrush) / 14 VA/8 W (hold) / DC 8 W |
|
Duty cycle
|
100 % continuously operated
|
|
Cycling rate
|
approx. 1000 c.p.m. |
|
Rating
|
cable plug or cable IP65
|
Installation / Accessories
| Installation |
As required, but preferably with solenoid system upright
|
|
Electrical connection
|
Cable plug for 7 mm ø cable (supplied as standard) / Moulded-in, temperature resistant cable (on request)
|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th