Add to wishlist

Burkert – Type 0212 – 2/2 Way Direct-Acting Plunger Valve

จุดเด่นของ Type 0212 – 2/2 Way Direct-Acting Plunger Valve

  • Compact design, up to DN 3
  • Vibration-resistant block-screwed coil design
  • Housing made of brass and stainless steel with Bürkert flange SFB

 

Send Email LINE OA
หมวดหมู่: ,

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 0212

General Technical Data

Design

Type 0212 is a 2-way solenoid valve, direct acting, normally closed (Circuit function A) or normally open (Circuit function B).

Fluid and Ambient Temperature

For hazardous locations Div. 1 (T4 Rated)

Max. Ambient Temperature 104 °F (40 °C)
Max. Fluid Temperature 194 °F (90 °C)

The UL-listed valve for Hazardous Locations is suitable for the fluids air, inert gas, water and gasoline.

For hazardous locations Div. 1 (T6 Rated)

Max. Ambient Temperature 104 °F (40 °C)
Max. Fluid Temperature 140 °F (60 °C)

Pressure Range

For maximum inlet pressure, see label on the valve.

Installation

Before installing valve ensure that piping etc. is free of foreign matter (metal fillings, seal materials, welding scale etc.). Installation as required but preferably with coil uppermost. Installation in this position tends to prevent foreign matter remaining in core tube (increased life). Do not put any loads on coil unit.

The outlet port is coded on side of body of the Type 0212 valve. For common pressure, align “A” marking on valve and manifold. To remove valve from manifold loosen only the two unsealed screws. Manifolds can be connected together with nipples.

Approvals

The valve is either approved as

General Purpose valve for Hazardous Locations

    • Class I – Division 1, Group A, B, C, D
    • Class II – Division 1, Group E, F, G
    • Class III – Division 1 and 2
    • Operating Temperature T 4

OR

General Purpose valve for Hazardous Locations

    • Class I – Division 1, Group A, B, C, D
    • Class II – Division 1, Group E, F, G
    • Class III – Division 1 and 2
    • Operating Temperature T 6

OR

FM approved as Non Incendive for Hazardous Locations

    • Class I – Division 2, Group A, B, C, D
    • Class II – Division 2, Group E, F, G
    • Class III – Division 1 and 2
    • Operating Temperature T 4
    • UL listed for Ordinary locations
    • CSA approved for Ordinary locations

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th