2/2 way and 3/2 way Bürkert TwinPower rocker solenoid valve with separating diaphragm
From the fluidics perspective, Type 6626 combines the reliable and successful rocker principle. Due to the new Bürkert TwinPower concept, this actuator enables drastic reduction of installation space while maintaining performance output. Hence, the 16 mm wide medium separated rocker valve, with 3.0 mm DN and a pressure resistance of 2 bar, provides the same performance as a traditional 22 mm valve. In addition, the integrated power reduction decreases energy consumption by 75%. In combination with other design features, the heat transfer into the medium can be reduced to a minimum. With regard to the design, special attention has been placed on excellent cleanability and high reliability. By using high quality materials, Type 6626 is also ideal for handling aggressive medium. The valve is available as a 2/2-way and 3/2-way version.
The type 6626 is only available until 1/1/27. Please contact us for a consultation regarding the most suitable successor article for your requirements.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 6626 สามารถใช้ได้ร่วมกับ
General Technical Data
Product properties |
|
Dimensions | Detailed information can be found in chapter “5. Dimensions” on page 6. |
Material | |
Seal | FFKM, FKM or EPDM |
Fluid body | PEEK or PPS |
Internal volume | Bürkert flange: from 550 µl Tube connector: from 1100 µl Threaded body: from 600 µl |
Nominal diameter | DN 2.0 (Vac1.)…3 bar) DN 3.0 (Vac1.)…2 bar) |
Switching function | Detailed information can be found in chapter “3. Circuit functions” on page 4. |
Performance data |
|
Duty cycle | 100 % continuous rating |
Switching times | Opening: ca. 10 ms (pressure rise 0…10 %) Closing: ca. 15 ms (pressure drop 100…90 %) |
Electrical data |
|
Operating voltage | 12 V DC, 24 V DC |
Voltage tolerance | 12 V DC + 10 % / – 5 %24 V DC ± 10 % |
Switching frequency | Max. 2 Hz |
Nominal power | 13.6 W inrush power 3.4 W nominal holding power (internal power reduction ) |
Medium data |
|
Operating medium | Resistant to neutral and aggressive liquids and gases, see chapter “4.1. Chemical Resistance Chart – Bürkert resistApp” on page 5 |
Medium temperature | FFKM: + 15 °C…+ 50 °C FKM: – 10 °C…+ 50 °C EPDM: – 10 °C…+ 50 °C (for orifice DN 2.0) |
Process/Port connection & communication |
|
Port connection | Bürkert Flange (16 x 46 mm) Tube connection UNF 5/16″…24 G ⅛” |
Electrical connection | PFA single leads, 0.5 mm², AWG 20, length 300 mm Rectangular plug Type 2505 |
Environment and installation |
|
Installation position | As required, preferably with actuator upright |
Degree of protection | IP40 with flying leads IP30 with rectangular plug Type 2505 |
Ambient temperature | FFKM: + 15 °C…+ 55 °C FKM: – 10 °C…+ 55 °C EPDM: – 10 °C…+ 55 °C (for orifice DN 2.0) |
Minimum bending radius for flying leads version | Single bending: 8 mm Multiple bending: 13 mm |
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th