Showing 1–7 of 40 results

SmartMeasurement เป็นผู้ผลิตเครื่องวัดการไหลชั้นนำ ด้วยประสบการณ์กว่า 25 ปีในการออกแบบและประยุกต์ใช้เทคโนโลยีการไหลต่างๆ ซึ่งแตกต่างจากผู้ผลิตส่วนใหญ่ที่เชี่ยวชาญในเทคโนโลยีการวัดการไหลเพียงหนึ่งหรือสองเทคโนโลยี SmartMeasurement ให้กลไกการจัดหาที่เป็นมิตรต่อผู้ใช้อย่างเป็นกลางเพื่อให้คุณวิเคราะห์ เลือก และจับคู่เครื่องวัดการไหลที่ “เหมาะสมที่สุด” จากเทคโนโลยีการไหลที่หลากหลายของเราตามลำดับ เพื่อตอบสนองความต้องการใช้งานเฉพาะของคุณ

  • Color graphic LCD display 128×64 for flow rate, total flow & signal shape
  • 32 Mbyte datalogger; up to 200,000 data fields
  • No-moving-parts design creates no pressure loss
  • Velocities from 0.03 ~ 40 feet/sec (0.01 ~ ± 12 m/s)
  • Any liquids containing ≤ 30% suspended solids, including waste water
  • High open-channel accuracy; ±2.0% of reading
  • Oscilloscope function for diagnostics
  • AR (Anti-Round) Mode (patent pending)
  • Fine Time Measurement Technology (Patented)
  • Data logger function; includes date, totalizer, diagnostics
  • Response time less than 1 second

  • Available in ¼” – 24″ (3-600 mm) line sizes
  • Will measure a wide range of fluid velocities; 0-50 feet/sec (0-15 m/s)
  • GPRS, CDMA and SRD radio communications available
  • Conductivity of measured medium: ≥ 20 μs/cm
  • IP68 enclosure; suitable for underground applications
  • Available FEP liner suitable for vacuum applications
  • Excellent accuracy; ±0.5% of reading
  • Empty pipe, current excitation and remaining battery life alarms
  • NIST traceable calibration certificate

  • Superior accuracy – to 0.1% of reading over 30:1 turn-down
  • Uniform rotation means low pressure loss
  • No metal-to-metal contact provides for long service lifetime
  • Self-lubricating
  • Very low noise and vibration
  • Reduced number of parts reduces maintenance requirements
  • Rugged double case construction prevents loss of calibration due to changes in pressure or temperature
  • NIST traceable calibration certificate

จุดเด่นของ SmartMeasurement - ALSONIC-BAWM

  • Alphanumeric LCD display for flow rate, totalized flow, and a variety of diagnostics
  • Maintenance free construction; durable brass or cast iron body & no-moving-parts design
  • Temperature compensaton for cold water and hot water up to 176°F (80°C)
  • ½” – 2” threaded connections, 2”-12” ANSI or DIN flanged
  • Complies with OIML R49 / ISO 4064 Class D, ANSI / AWWA C708 & NSF 61 Annex G
  • SDI-12 datalogger and GPRS options
  • Can be integrated with AMR systems via M-Bus or RS-485/Modbus
  • NEMA 6P / IP68 rating; fully submersible
  • 2 year data logger with 700 daily and 24 monthly totals
  • Battery life in excess of 6 years
  • NIST traceable calibration certificate
  • Built-in diagnostics

  • High accuracy and repeatability
  • Conditions flow before measuring
  • Minimal straight pipe requirements
  • Very wide selection of sizes – ½”~120″ (15~3000mm)
  • Lower pressure loss than most other flow measuring technologies
  • Can measure clean or dirty liquids, slurries, gases and steam
  • Low signal noise
  • Anti-fouling, non-clogging design
  • Will accommodate multiphase flows
  • Good particle tolerance; not sensitive to suspended contaminents

  • Measurement of mass flow, density, temperature & volume flow
  • Suitable for aggressive & contaminated media
  • Measurement & display of percent water-cut for oil/water mixtures
  • Excellent purging & sterilization capabilities thanks to dead spot-free construction
  • High rotation frequency & well-balanced measuring tubes
  • Operates at temperatures up to 575°F (300°C)
  • Individual 8-point calibration including NIST-traceable report
  • Optional EX protection

จุดเด่นของ SmartMeasurement - ALDPT-LT

  • High accuracy; low temperature drift (±0.15% FS/10°C)
  • 100:1 turn-down measurement of gas, liquid and steam
  • Security lock- parameters
  • Advanced diagnostics capabilities
  • Wide measuring range
  • Software compensation
  • Available in 316SS, Tantalum and other exotic materials
  • Available in either Intrinsically Safe ExiaIICT4 or Explosion Proof ExdIICT6, ATEX approved
  • Auto-zero adjustment
  • Analog 4~20 mA DC two wire linear output
  • HART protocol, or Foundation Fieldbus