Skip to content
AIR SERVICE UNITS SERIES AIRPLUS - ALUMINIUM
จุดเด่นของ PNEUMAX - ตัวกรองลม FILTER
- Double filter action: air flow centrifugation and filter element
- Available in 3 sizes with flow rates up to 14000 Nl/min and connections from 1/4” to 1”
- Filtering cartridge made of HDPE available in three different filtration grades (5µm, 20µm, 50µm)
- Filter cartridge can be regenerated by washing / blowing it or replaced
- Bowl assembly via bayonet type quick coupling mechanism with safety button
- Semi-automatic or automatic drain
- Atex certification (II 2GD)
- Inlet pressures up to 20 bar
AIR SERVICE UNITS SERIES 1700 STEEL LINE
PNEUMAX – ตัวกรองลม FILTER SIZE 2 INOX TG2 – 1/4 NTP – 3/8 NPT – G1/4
จุดเด่นของ PNEUMAX - ตัวกรองลม FILTER SIZE 2
- Body, bowl and internal components in AISI 316L stainless steel.
- A4 (AISI 316) stainless steel fixing screws.
- Manual or automatic condensed drain.
Air distribution
- Available in 4 sizes with flow rates up to 8000 Nl/min and connections from 1/8” to 1”
- Filtering cartridge with filtration grade of 0,01 μm
- Filtering performances 99.97% (particles up to 0.01 μm)
- Bowl assembly via bayonet type quick coupling mechanism with safety button
- Semi-automatic or automatic drain
- Atex certification (II 2GD or II 3GD)
- Inlet pressures up to 20 bar
Air distribution
- Manifold pressure regulators
- Available in four pressure ranges up to 12 bar
- Inlet pressure common for the whole manifold of pressure regulator
- A maximum of 6 pressure regulators can be mounted
- Atex certification (II 3GD)
- Assembly with X or Y flanges
Air distribution
- Diaphragm pressure regulator with relieving
- Available in 4 sizes with flow rates up to 8000 Nl/min and connections from 1/8” to 1”
- Low histeresis rolling diaphragm and balanced spool
- Available in four pressure ranges up to 12 bar
- Fitted with panel mounting locking ring
- Available with pressure gauge or digital pressure switch integrated
- Atex certification (II 2GD or II 3GD) inlet pressures up to 20 bar
ACCESSORIES
- This new type of miniaturised pressure regulators are mostly indicated for the use on the secondary level of the pneumatic circuits.
- Thanks to the contained dimensions are particularly indicated to be used very closely or directly mounted onto the consumption.
- Diaphragm pressure regulator with relieving
- Available with 2 front outputs connections G1/8 “ or with 1 front output and integrated pressure gauge on the opposite side
- Low histeresis rolling diaphragm and balanced spool
- Available in four pressure ranges up to 12 bar
- Fitted with panel mounting locking ring
- Available with Integrated pressure gauge
- Air supply can be applied by both directions (Right or Left)
- Max. 6off pressure regulators in manifold configuration
- Atex certification (II 3GD)