Skip to content
Air distribution
ACCESSORIES
- Working temperature: -20°C +70°C
- Maximum working pressure: 10 bar
- Fluid: Compressed air (others fluids on requests)
- Nichel-plated brass body, brass grip, silicone free nbr gaskets
- Thread: Cylindrical with O-ring
Air distribution
- Aluminium body
- Wall mounting possibility with M8 screws
- Filtering cartridge made of HDPE available in three different filtration grades (5μm, 20μm, 50μm)
- Filter cartridge can be regenerated by washing / blowing it or replaced
- With blind metal bowl
- Bowl assembly via bayonet type quick coupling mechanism with safety button
- Automatic condensation drain
Air distribution
Mechanics with base for solenoid to be used where an electric pilot system is required.
Air distribution
- 3/2 N.C. poppet valve for entering and exhausting the circuit
- It allows to pneumatically supply the part of the system downstream of the valve
- Opening and closing of the valve via solenoid operator
- The supply pressure must be minimum 2 bars or higher
- It is possible to produce the external supplied solenoid version by mounting the 305.10.05 between the valve main body and the solenoid pilot valve.
- The air supply can only be done via port 1
- Ensure that the downstream air consumption will not cause a pressure drop which could result in the pressure falling below the minimum operating values.
- If the pressure inside the valve falls below 2 bars, the valve might shut off.
- Atex certification (II 2GD o II 3GD) on request
Air distribution
- Double filter action: air flow centrifugation and filter element
- Filtering cartridge made of HDPE available in three different filtration grades (5μm, 20μm, 50μm)
- Filter cartridge can be regenerated by washing / blowing it or replaced
- Semi-automatic or automatic drain
- Diaphragm pressure regulator with relieving
- Low histeresis rolling diaphragm and balanced spool
- Available in four pressure ranges up to 12 bar
Air distribution
- Filter – diaphragm pressure regulator with relieving Low histeresis rolling diaphragm and balanced spool Filtering element made of HDPE available in 3 different filtration grades (5μm, 20μm, 50μm) Semi-automatic or automatic drain Available in four pressure ranges up to 12 bar Oil mist lubricator Variable orifice size in function of the flow rate Oil quantity regulation mechanism and oil quantity visualization dome made of polycarbonate (PC) Oil refill plug Available with low level electrical sensor NO and NC Bowls screwed to the body (Size 1) Bowl assembly via bayonet type quick coupling mechanism with safety button (Size 2 – Size 3) Atex certification (II 2GD o II 3GD) on request