Skip to content
Airtec
จุดเด่นของ Airtec - Series RE-46
- multi-pin, ASi, Profibus-DP
- Profinet-RT, CANopen
- EtherCAT 4-24 stations
- 680 - 950 Nl/min
Airtec
จุดเด่นของ AIRTEC - SERIES REF-14
- Available up to 24 stations
- Valve width 14mm
- DIN Rail mountable
- Multi-pin and IO Link available
- Internal or external pilot port
- Adapter plate for additional operating port
- Pressure dividing plate in air channel 1, 3 and 5 or only in channel 1
- Separate pressure zones
จุดเด่นของ Airtec - Series MI-01, MI-02, MI-03
- 3/2, 5/2, and 5/3 Way funtion
- ISO 5599/1 Standrad
- NAMUR Standard
- Anodized Aluminum Bodies
- Bodies Made from Aluminum Bar Stock (not casting)
- Available in Stainless Steel
- Single Sub-base or Multi Station Sub-base
- Flow Controls and Regulators Available
จุดเด่นของ Airtec - Series SE
- A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve to the cylinder ports is unrestricted. If valve port 1 is de-pressurized, air is exhausted from 2 to 3.
จุดเด่นของ Airtec - Series SU
- 3/2-way one-shot valve. It converts a continuous pneumatic signal into a 0.3 s pulse.
จุดเด่นของ Airtec - Series SUZ
- The valve operates after two input signals at 12 arriving within 0.5 s.
- The valve is actuated as long as the signals continue.
- If the input signals do not arrive within 0.5 s, the valve does not operate.
- Both signals must be reset before the valve switches back on.
- In addition, it has a self- locking device. A signal to 14 actuates the two-signal-control as a standard 5/2-valve.
- When the signal at 14 ends, the valve resets.
จุดเด่นของ Airtec - Series SZ
- The valve operates after two input signals at 12 arriving within 0.5 s.
- The valve is actuated as long as the signals continue.
- If the input signals do not arrive within 0.5 s, the valve does not operate.
- Both signals must be reset before the valve switches back on.