Skip to content
Air distribution
- Aluminium body
- Wall mounting possibility with M8 screws
- Filtering cartridge made of HDPE available in three different filtration grades (5μm, 20μm, 50μm)
- Filter cartridge can be regenerated by washing / blowing it or replaced
- With blind metal bowl
- Bowl assembly via bayonet type quick coupling mechanism with safety button
- Automatic condensation drain
Air distribution
Mechanics with base for solenoid to be used where an electric pilot system is required.
Air distribution
- 3/2 N.C. poppet valve for entering and exhausting the circuit
- It allows to pneumatically supply the part of the system downstream of the valve
- Opening and closing of the valve via solenoid operator
- The supply pressure must be minimum 2 bars or higher
- It is possible to produce the external supplied solenoid version by mounting the 305.10.05 between the valve main body and the solenoid pilot valve.
- The air supply can only be done via port 1
- Ensure that the downstream air consumption will not cause a pressure drop which could result in the pressure falling below the minimum operating values.
- If the pressure inside the valve falls below 2 bars, the valve might shut off.
- Atex certification (II 2GD o II 3GD) on request
Air distribution
- Double filter action: air flow centrifugation and filter element
- Filtering cartridge made of HDPE available in three different filtration grades (5μm, 20μm, 50μm)
- Filter cartridge can be regenerated by washing / blowing it or replaced
- Semi-automatic or automatic drain
- Diaphragm pressure regulator with relieving
- Low histeresis rolling diaphragm and balanced spool
- Available in four pressure ranges up to 12 bar
Air distribution
- Filter – diaphragm pressure regulator with relieving Low histeresis rolling diaphragm and balanced spool Filtering element made of HDPE available in 3 different filtration grades (5μm, 20μm, 50μm) Semi-automatic or automatic drain Available in four pressure ranges up to 12 bar Oil mist lubricator Variable orifice size in function of the flow rate Oil quantity regulation mechanism and oil quantity visualization dome made of polycarbonate (PC) Oil refill plug Available with low level electrical sensor NO and NC Bowls screwed to the body (Size 1) Bowl assembly via bayonet type quick coupling mechanism with safety button (Size 2 – Size 3) Atex certification (II 2GD o II 3GD) on request
Air distribution
- Filter – diaphragm pressure regulator with relieving
- Available in 3 sizes with flow rates up to 3500 Nl/min and connections from 1/8” to 3/4”
- Low histeresis rolling diaphragm and balanced spool
- Filtering element made of HDPE available in 3 different filtration grades (5μm, 20μm and 50μm)
- Bowls screwed to the body (Size 1)
- Bowl assembly via bayonet type quick coupling mechanism with safety button (Size 2 – Size 3)
- Semi-automatic or automatic drain
- Available in four pressure ranges up to 12 bar
- Fitted with panel mounting locking ring
- Atex certification (II 2GD o II 3GD) on request
1700 STEEL LINE SERIES - SIZE 3
- Body, bowl and internal components in AISI 316L stainless steel.
- A4 (AISI 316) stainless steel fixing screws.
- Manual or automatic condensed drain