Skip to content
Pneumatic and Automation
SmartMeasurement – Low Cost Turbine Flow Meter – Axial Turbine Meter [ALTM-T]
- High resolution and fast response time; 5 to 50 msec
- Wide temperature range; -4 ~ 230 °F (-20 ~ 110 °C)
- Pressures up to 3,600 psig (250 bars) using optional high-pressure flanges
- Easily cleaned; designed to flush particulates through the meter with the fluid media
- NPT threaded process connection standard, optional BSP threads & flange connections available
- Factory calibrated, traceable to NIST
- Battery-powered display available
- RS-485 and HART communicaitons available
Pneumatic and Automation
SmartMeasurement – Low flow Small size Ultrasonic Flow Meter [ALSONIC-MINI]
จุดเด่นของ SmartMeasurement - ALSONIC-MINI
- Available in ¼” – 3″ (8-80 mm) pipe sizes
- Will measure a wide range of fluid velocities; 0.3-16.5 f/s (0.1 ~5.0) m/s
- Data logger includes daily, monthly and total
- Outputs include 4-20mA, alarms and MODBUS RTU
- Suitable pipe materials including stainless steel, carbon steel, copper, PVC, PVDF, polypropylene and HDPE.
- Accuracy; ±2% of reading
- Energy and BTU measurement optional
- NIST traceable calibration certificate
Pneumatic and Automation
จุดเด่นของ SmartMeasurement - ALVAMT
- Versatile design may be used for gas, steam, and liquids
- High resolution and fast response time; – 5 to 50 msec
- Wide temperature range from -40 up to 750 °F (-40 to 400 °C)
- High pressure operation up to 6100 psi (420 bar)
- Process connections including NPT threads, ANSI flanged, & Tri-Clamp available
- Electronics either intrinsically safe EEx ia II CT5, or Ex proof EEx d II CT6
- Wide array of materials available including Hastelloy B & C,Ti, Cu, Al, etc..
- PTFE and other liner materials available
- NIST-traceable calibration
Pneumatic and Automation
SmartMeasurement – Micro-Bend Coriolis Mass Flow Meter [ALCM-MB]
- Suitable for aggressive & contaminated media
- Measurement of mass flow, density, temperature & volume flow
- High rotation frequency & well-balanced measuring tubes
- Excellent purging & sterilization capabilities thanks to a construction that is free of dead spots
- Operates at temps up to 662°F (300°C)
- Individual 8-point-calibration including report
- Optional EX protection
Pneumatic and Automation
SmartMeasurement – Multi-Variable Differential Pressure Transmitter [ALDPT-MV]
จุดเด่นของ SmartMeasurement - ALDPT-MV
- Multi-parameter capablity in a single transmitter – up to three measured values
- May be used for level and flow measurement of gas, liquid and steam
- Modular: interchangeable electronics with self-reconfiguration
- Advanced diagnostics capabilities
- Dynamic flow correction with continuous calculation of Reynolds’s number and flow
- Displays process value(s) and alarm status
- Mass and standard volume flow in accordance with AGA 3 or DIN EN ISO 5167
- Convenient; configurable via local operating keypad
- Linearization of the primary elements
- Analog 4～20 mA DC two wire linear output
- HART protocol
Pneumatic and Automation
SmartMeasurement – Oval Gear Micro Flow Positive Displacement Meter [ALMGPD]
- Compact and lightweight, suitable for OEM use
- Reverse-flow detection and pulse multiplication functions
- Ex-protection EExiaIICT6/T4
- Resistance to high voltage from 50 kV up to 120 kV
- Special meters with high-pressure connectors for service up to 690 barg (10,000 PSIG)
- Heated versions are available on request
- The K-factor (no. of pulses per liter) is nearly constant over a wide range.
Pneumatic and Automation
SmartMeasurement – Oval Gear Positive Displacement Meter [ALOVPD]
- Superior accuracy – to 0.5% of reading with ±0.03% repeatability
- Elliptical gear design provides low pressure loss
- Meter body is available in CS (Std), 304SS or 316SS
- Bearings are available in CS (Std), 304SS or 316SS as well as Alnico
- Will accommodate pressures of up to 870 psig (60 bar)
- Will accommodate viscosities of up to 1000 cP