Skip to content
ACCESSORIES AND FIXING DEVICES
จุดเด่นของ PNEUMAX - Piston rod lock Series 1260 - 1320
- The piston rod lock devices are clamping units mounted on the microcylinders front head. They allow the piston rod to lock in any position.
- Piston rod clamping is mechanically obtained by springs actuated purpose-made jaws.
- This method allows to lock the cylinder in the desired position, should the air pressure drop.
- The piston rod lock device is not a safety device.
BRASS PUSH-IN FITTINGS RAP SERIES
จุดเด่นของ PNEUMAX - PLUG - 09
- ฺBrass push-in fittings
จุดเด่นของ PNUEMAX - PNEUMATIC ACTUATED VALVES 3/2 – 5/2, 1/2″ NPT
- All external and internal parts are aluminum material.
จุดเด่นของ PNUEMAX - PNEUMATIC ACTUATED VALVES 3/2 – 5/2, 1/4″ NPT
- All external and internal parts are aluminum material.
จุดเด่นของ PNUEMAX - PNEUMATIC ACTUATED VALVES 3/2 – 5/2, 1″ NPT
- All external and internal parts are aluminum material.
จุดเด่นของ PNEUMAX Pneumatic cylinders SERIES 1348-1349-1350
| Fluid : | Filtered and lubricated air |
| Pressure : | 10 bar |
| Operating temperature : | -5°C - +70°C |
Air distribution
- 3/2 N.C. poppet valve for entering and exhausting the circuit
- It allows to pneumatically supply the part of the system downstream of the valve
- Opening and closing of the valve via solenoid operator
- The supply pressure must be minimum 2 bars or higher
- It is possible to produce the external supplied solenoid version by mounting the 305.10.05 between the valve main body and the solenoid pilot valve.
- The air supply can only be done via port 1
- Ensure that the downstream air consumption will not cause a pressure drop which could result in the pressure falling below the minimum operating values.
- If the pressure inside the valve falls below 2 bars, the valve might shut off.
- Atex certification (II 2GD o II 3GD) on request