ข้ามไปยังเนื้อหา
CO2 / Nitrogen Regulators
Master Pneumatic – CX-3 CO2 Integral Coalescent Filter/Relief Valve 1/8 and 1/4
จุดเด่นของ CX-3 CO2 Integral Coalescent Filter/Relief Valve 1/8 and 1/4
- Inline mounting
- Diaphragm-type design
- Outstanding control at a relatively low cost
- Pressure gauge optional
- NPTF port threads, optional BSPP threads
Accessories, Brackets, Gauges and Valves
Master Pneumatic – DED Electronically Controlled Warrior Drain 1/4, 3/8 and 1/2
จุดเด่นของ DED Electronically Controlled Warrior Drain
- Viton seals in the valve to ensure long life and resistance to synthetic oils
- O-ring seals on timer cycle adjusters to ensure water resist and sealing IP6
- Fully Automatic - No maintenance
- Manual TEST switch (micro switch
- CD tested, UL Recognized
- Small compact design
- NPTF port threads; optional BSPP threads
- Other voltages available
Accessories, Brackets, Gauges and Valves
- Discharge rate is 300 gallons (1135 liters) per hour at 100 psig (6.9 bar). Flushing action is instantaneous with minimal air loss compared to conventional drains.
- HYDRO-JECTOR drains are available with 1/8 or 1/4 nipples. The 1/4 size is used with SERIES 380 and VANGUARD filters.
- There is a manual override on the drain valve for clean-out and emergency use.
- Inorder to install a hydro-jector on a VANGUARD or SERIES 380 filter you must order filter with the option designated “LDC”. This option removes the drain cock, and replaces it with a 1/4” threaded adapter. If ordering the units together the filter will automatically be an "LDC".
- The HYDRO-JECTOR is not recommended where heavy oil or foam is present, as can be the case in separators or large aftercoolers.
Adsorbing Filters - Oil Vapor Removal
Master Pneumatic – FC350-E9 Series Modular Adsorber 1/4, 3/8, 1/2
จุดเด่นของ FC350-E9 Series Modular Adsorber 1/4, 3/8, 1/2
- Modular or inline mounting.
- Designed to remove oil vapor that cannot be removed by a coalescent filter. Also removes odors and tastes.
- Filter cartridge contains activated carbon.
- Inlet pressure rated at 250 pisg (17 bar) with metal bowls up to or at 175°F (79°C.).
- Color caps available for visual management systems. (Blue, red, yellow and grey). Consult factory for custom colors.
- Front mounted modular clamping design with encapsulated screws.
- Compatible with modular 380 series of products.
- Polycarbonate plastic bowl with shatterguard. Optional metal bowl.
- NPTF port threads; optional BSPP threads.
Adsorbing Filters - Oil Vapor Removal
Master Pneumatic – FC380-E9 Full Size Modular Adsorber 3/8, 1/2 and 3/4
จุดเด่นของ FC380-E9 Full Size Modular Adsorber 3/8, 1/2 and 3/4
- Modular or Inline mounting.
- Filter cartridge contains activated carbon.
- Poycarbonate plastic bowl with steel shatterguard; optional aluminum bowl, extended aluminum bowl iwth higher flow filter cartridge.
- Manual drain.
- NPTF port threads; optional BSPP threads.
Accessories, Brackets, Gauges and Valves
Master Pneumatic – Gauges for Coalescent Filters and General Filters
จุดเด่นของ Gauges for Coalescent Filters and General Filters
- A differential gauge measures pressure drop across the element indicating a replacement element is needed when the drop increases into the range of 7-10 psi (0.5 - 0.7 bar).
Accessories, Brackets, Gauges and Valves
จุดเด่นของ Gauges for Coalescent Filters and General Filters
- Gauges are back mounted with shatterproof plastic faces; heavy duty construction of bourdon and indicator dial for use in rugged environments. Large numerals display psig in red and bar in black. Accuracy within 2 to 3 percent.