FRL Heavy Industrial
Master Pneumatic – CFDR55M, CFDR56M Miniature Integral Filter and Regulator 1/8 and 1/4
จุดเด่นของ CFDR55M, CFDR56M Miniature Integral Filter and Regulator 1/8 and 1/4
- Filter and Regulator consolidated in a single assembly
- Inline mounting
- 5-µm-rated polyethylene filter element; optional sintered bronze elements
- High-strength polycarbonate plastic filter bowl; optional aluminum bowl
- Internal automatic drain; optional manual drain
- Piston-type regulator (CFDR55M models) or diaphragm-type (CFDR56M models)
- Self-relieving regulator; non-relieving optional
- Pressure gauge
- NPTF port threads; optional BSPP threads
CO2 / Nitrogen Regulators
Master Pneumatic – CX-0 and CX-1 Miniature CO2 Regulator 1/8 and 1/4
- Inline mounting
- Avaliable in relieving and non-relieving diaphragm designs.
- Outstanding control at a relatively low cost
- Pressure gauge optional
- NPTF port threads; optional BSPP threads
CO2 / Nitrogen Regulators
Master Pneumatic – CX-2 Miniature CO2 Relief Valve 1/8 and 1/4
จุดเด่นของ CX-2 Miniature CO2 Relief Valve 1/8 and 1/4
- Inline mounting
- Diagphram-type design
- Outstanding control at a relatively low cost
- Pressure gauge optional
- NPTF port threads; optional BSPP threads
CO2 / Nitrogen Regulators
Master Pneumatic – CX-3 CO2 Integral Coalescent Filter/Relief Valve 1/8 and 1/4
จุดเด่นของ CX-3 CO2 Integral Coalescent Filter/Relief Valve 1/8 and 1/4
- Inline mounting
- Diaphragm-type design
- Outstanding control at a relatively low cost
- Pressure gauge optional
- NPTF port threads, optional BSPP threads
Lubricators, Injection; Serv-Oil ® & Micro Lubrication
Accessories, Brackets, Gauges and Valves
Master Pneumatic – DED Electronically Controlled Warrior Drain 1/4, 3/8 and 1/2
จุดเด่นของ DED Electronically Controlled Warrior Drain
- Viton seals in the valve to ensure long life and resistance to synthetic oils
- O-ring seals on timer cycle adjusters to ensure water resist and sealing IP6
- Fully Automatic - No maintenance
- Manual TEST switch (micro switch
- CD tested, UL Recognized
- Small compact design
- NPTF port threads; optional BSPP threads
- Other voltages available
Accessories, Brackets, Gauges and Valves
- Discharge rate is 300 gallons (1135 liters) per hour at 100 psig (6.9 bar). Flushing action is instantaneous with minimal air loss compared to conventional drains.
- HYDRO-JECTOR drains are available with 1/8 or 1/4 nipples. The 1/4 size is used with SERIES 380 and VANGUARD filters.
- There is a manual override on the drain valve for clean-out and emergency use.
- Inorder to install a hydro-jector on a VANGUARD or SERIES 380 filter you must order filter with the option designated “LDC”. This option removes the drain cock, and replaces it with a 1/4” threaded adapter. If ordering the units together the filter will automatically be an "LDC".
- The HYDRO-JECTOR is not recommended where heavy oil or foam is present, as can be the case in separators or large aftercoolers.