Skip to content
PNEUMAX – Piston rod lock Series 1260 – 1320 | อุปกรณ์ล็อคก้านลูกสูบ
The Pneumax – Piston rod lock devices are clamping units mounted on the microcylinders front head. They allow the piston rod to lock in any position.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General
- Piston rod clamping is mechanically obtained by springs actuated purpose-made jaws.
- This method allows to lock the cylinder in the desired position, should the air pressure drop.
- The piston rod lock device is not a safety device.
Construction characteristics
Mounting bracket | Anodised aluminium | |
Body | Anodised aluminium | |
Clamping jaws | Hardened alloy copper | |
Piston | Acetal resin | |
Seal | NBR | |
Springs | Springs steel | |
Operational characteristics
Fluid | Anodised aluminium | |
Working pressure | Anodised aluminium | |
Working temperature | Hardened alloy copper | |
Functioning | Acetal resin | |
Locking | NBR | |
Unlocking | Springs steel | |
“Attention: Dry air must be used for application below 0°C”
Use and maintenance
Operate within the specified technical characteristics.
The piston rod lock does not require maintenance if properly utilised.
The working inlet port has to be pressurised for assembling the piston rod lock device on cylinder. Alternatively adjust the jaws with screw located on connection.
Spare parts are not available.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th