Add to wishlist
PNEUMAX - COMPACT CYLINDERS 1560-1580 EUROPE SERIES

PNEUMAX – COMPACT CYLINDERS EUROPE SERIES

จุดเด่นของ PNEUMAX – COMPACT CYLINDERS EUROPE SERIES

Fluid Filtered air. No lubrication needed, if applied it shall be continuous.
Maximum working pressure 10 bar
Working temperature
– 30°C – +80°C with standard seals (magnetic or non magnetic piston)
– 5°C – +80°C with HNBR seals (magnetic piston)
– 5°C – +120°C with HNBR seals (non magnetic piston)
Send Email LINE OA
หมวดหมู่: , , , , , , ป้ายกำกับ:

PNEUMAX – COMPACT CYLINDERS EUROPE SERIES

This series of cylinders is available in two versions with different threaded fixing holes.
The first one includes cylinders from Ø 32 to Ø 100 called “ISO” with fixing holes same as cylinders ISO 6431 – VDMA 24562. Cylinders from Ø 20 to Ø 100 called “UNITOP”, parts of second series, are mainly according to standard UNITOP RU – P/6 – P/7. Cylinders Ø 12 and Ø 16 non standard, are interchangeable with similar products available on the market. The ISO version uses all fixing devices of series 1320 with exception of intermediate trunnion, while for cylinders Ø 12, Ø 16 and for “UNITOP” version are available fixing devices as flanges, foot, male and female clevis made with aluminium or steel. For use of magnetic sensors see directions on next page.

PNEUMAX – COMPACT CYLINDERS EUROPE SERIES

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

EUROPE SERIES

General

Arbitrary mount cylinder

Construction characteristic

Body anodised aluminium
End caps from Ø12 to Ø25 aluminium alloy UNI 9006/1 anodised
from Ø32 to Ø100 UNI 5076 aluminium die-casting and painted (cataphoresis)
Piston rod bushing sintered bronze
Piston rod from Ø12 to Ø25 stainless steel
froml Ø32 to Ø100 C43 chromed (on request stainless steel for all bores)
Piston from Ø12 to Ø25 plated zinc steel
from Ø32 to Ø100 aluminium alloy 2011 UNI 9002/5
Seals PUR (on request HNBR)
Spring zinc plated steel for springs

Technical characteristics

Fluid Filtered air. No lubrication needed, if applied it shall be continuous.
Maximum working pressure 10 bar
Working temperature
– 30°C – +80°C with standard seals (magnetic or non magnetic piston)
– 5°C – +80°C with HNBR seals (magnetic piston)
– 5°C – +120°C with HNBR seals (non magnetic piston)

Please follow the suggestions below to ensure a long life for these cylinders:

• use clean and lubricated air
• correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod.
• avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device)
• evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.)

Please note: air must be dried for applications with lower temperature.

Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help.

 

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th