Skip to content
Features
- Individual filter (FD50); piston-type regulator (R55M) or diaphragm-type (R56M); and wick-feed lubricator (L50).
- Inline mounting.
- 5-µm-rated polyethylene filter element; optional sintered bronze elements.
- High-strength polycarbonate plastic bowls or aluminum bowls.
- Internal automatic filter drain; optional manual drain.
- Self-relieving regulator; non-relieving optional.
- Pressure gauge.
- NPTF port threads; optional BSPP threads.
General Technical Data
Ambient/Media Temperature: Plastic Bowl |
40° to 125°F (4° to 52°C) |
Ambient/Media Temperature: Metal Bowl |
40° to 175°F (4° to 79°C) |
Bowls |
2-Ounce (60-ml) capacity polycarbonate plastic bowls or aluminum bowls |
Filter Drain |
Internal automatic drain; optional manual drain |
Filter Element |
5-µm-rated polyethylene; optional 5-µm, 20-µm, or 40-µm sintered bronze |
Fluid Media |
Compressed air |
Heads |
Aluminum |
Inlet Pressure |
15 psig (1 bar) minimum with automatic drain |
Plastic bowls |
150 psig (10 bar) maximum |
Metal bowls |
200 psig (13.7 bar) maximum |
Oil Adjustment |
Internal; tamper resistant |
Outlet Pressure |
Adjustable up to 100 psig (7 bar). |
Pressure Gauge |
0 to 160 psig (10.3 bar); 1/8 NPT gauge ports front and rear |
Panel Mounting |
1-3/16 inch (30 mm) hole required |
Regulator Dome and Knob |
Acetal |
Seals |
Nitrile |
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th