Skip to content
Online water analysis system
Type 8905 Online water analysis system is a compact and modular system for monitoring all important water parameters on one platform. It is a multichannel measuring system for the Bürkert sensor cubes as well as other electronic modules from the EDIP platform. The efficient device integration platform (EDIP) allows a high flexibility by using modularity in the hardware as well as in the software of the system.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties |
|
|
Material
|
Please make sure the device materials are compatible with the fluid you are using.
|
|
Housing material
|
PC (black, UV stabilized, UL94 V0)
|
| Cover of the electronic module housing material | PC (glass fibre reinforced, UV stabilized, UL94 V0, anthracite grey), PC (black, UV stabi- lized, UL94 V0) and glass |
| Cover of the sensor cube housing material |
PC (glass fibre reinforced, UV stabilized, UL94 V0, anthracite grey) and PC (transparent)
|
| Studs material |
Stainless steel
|
| Cable entry plate material |
Elastomer
|
| Fluid connection material | Biopolymer (EPDM seals) |
| Wall-mounting bracket material | Stainless steel |
| Self-adhesive bumpers material | Polyurethane |
|
Dimensions
|
Detailed information can be found in chapter “3. Dimensions” on page 5.
|
|
Data memory or data-logger
|
Integrated Micro SD, 2 GB; adjustable logging interval; external reading via USB or LAN port
|
| Display |
780×460 pixels resolution / Capacitive 7″ Touchscreen, backlit
|
| Weight | Approx. 8 kg (if equipped with 1×100…240 V AC power supply module + 1xHMIU module + 5 sensor cubes) / Up to 12 kg (if totally equipped) |
Electrical Data |
|
|
Operating voltage (“SUPPLY”)
|
00…240 V AC 50/60 Hz OR 20…30 V DC, ±10% tolerance, filtered and regulated connection to main supply: permanent (through external SELV and LPS power supply)
|
| Power consumption |
Max. 96 VA
|
Medium Data |
|
| Fluid |
Water without particles: drinking water, industrial water
|
| Fluid pH range |
pH 4…pH 9
|
| Fluid conductivity |
> 50 μS/cm if there is no pH sensor cube / > 100 μS/cm if there is one pH sensor cube
|
| Fluid Temperature |
+3 °C…+40 °C (+37 °F…+104 °F)
|
| Fluid pressure |
Refer to See data sheets of the sensor cubes and accessories, use the lowest pressure
|
| Fluid flow rate |
Min. flow rate: 6 l/h per installed sensor module, so with e.g. 3 sensor modules the min. flow rate is 6+6+6=18 l/h due to parallel installation.
|
Process/Port Connection & Communication |
|
| Sensor cubes | Max. 6 internal sensor cubes, max. 2 measurement water / Max. connection of 30 external sensor cubes via Bürkert-Systembus (büS) / Max. büS length 100 m (without T-connections) |
Approvals and Certificates |
|
|
Degree of protection acc. to IEC/EN 60529
|
IP65 with closed and tight housings
|
|
CE directives
|
The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable) |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th