Skip to content
Type 1060 – Electrical position feedback for pneumatically operated process valves
The electrical position feedback Type 1060 is designed for integrated mounting on CLASSIC Series process valves. Due to its simple and a very compact design, the feedback can easily be mounted on a valve. Valve positions are remotely reported electrically according to switch type: open, closed. The electrical position feedback for pneumatically operated process valve.
DOWNLOAD DATASHEET
TYPE 1060General Technical Data
Product Properties |
|
|
Dimensions
|
Detailed information can be found in chapter “2. Dimensions” on page 4.
|
| Housing material |
Plastic
|
| Micro switch material | Plastic |
| Micro switch operation |
1 switch over contact
|
| Application |
Electrical feedback (alarm-, emergency-, off-, follow-circuits, etc.) for solenoid valves, diaphragm valves, piston valves, gate valves
|
Electrical Data |
|
|
Contact rating – Up to 250 V AC
|
Maximum 5 A ohmic and inductive contact load / Filament load max. 0.5 A
|
| Contact rating – Up to 250 V DC |
Maximum 0.25 A ohmic contact load / Maximum 0.02 A inductive load / Maximum 0.02 A filament load
|
Environment and Installation |
|
|
Cable outlet installation and mechanical data
|
Can be rotated through 4 x 90°
|
| Connection installation and mechanical data | Solder terminals |
| Fixing installation and mechanical data | With cylindrical screw M3 x 28 resp. M3 x 30 |
| Cable diameter installation and mechanical data | 5…9 mm |
|
Operating conditions: Max. continuous temperature
|
125 °C
|
| Operating conditions: Degree of protection | IP65 DIN 40050 |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th