Add to wishlist

Burkert – Type 5411 – 3/2 Way Solenoid Valve for Pneumatic Applications

  • The type 5411 is not available anymore since 8/1/23
  • The successor types are (can be a little different because of the update): 6518, 6519
  • Please contact us for a consultation regarding the most suitable successor article for your requirements.
Send Email LINE OA
หมวดหมู่: ,

3/2 way solenoid valve for pneumatic applications

Type 5411 is a pilot operated 3/2-way solenoid valve with manual override as standard. The body includes a servo piston with the seat seals. Through pilot channels, the servo piston is either loaded with input pressure or released. A minimum pressure difference of 1 bar is required for switching. The vent port is integrated as a sintered bronze silencer directly in the valve body. The valves can be combined (up to 6 valves) on a single-channel manifold with common pressure supply.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

TYPE 5411

BURKERT TYPE 5411 สามารถใช้ได้ร่วมกับ

General Technical Data

Product Properties
Dimensions
Detailed information can be found in chapter “5. Dimensions” on page 7. 
Body material
Polyamide (reinforced) with moulded-in brass threads
Coil material Polyamide, Epoxy
Seal material NBR
Nominal diameter
DN 6.0 mm

Performance Data
Compressed air quality
ISO 8573-1:2010, class 7.4.41.)
Flow (QNn value air) 900 l/min (measured at + 20 °C, 6 bar pressure at valve inlet and 1 bar pressure difference)
Nominal operating mode 100% ED continuously rated
Switching times – Opening
50 ms pressure rise 0…90%
Switching times – Opening 30 ms pressure drop 100…10%

Electrical Data
Operating voltage
24 V DC / 24/110/230 V, 50…60 Hz
Power consumption (max.) Version with V DC: 2 W / Version with V AC: 11 VA (inrush), 6 VA (hold)
Voltage tolerance
±10%

Medium Data
Type of medium
Neutral medium, e.g. lubricated or unlubricated compressed air
Medium temperature – 10 °C…+ 60 °C

Process/Port Connection & Communication
Port connection size
G 1⁄4
Electrical connection Tag connectors according to DIN EN 175 301 – 803 Form A for cable plug Type 2518 / Detailed information can be found in chapter “Cable plug Type 2518, Form A accord- ing to DIN EN 175301-803” on page 12.

Approvals and Certificates
Degree of protection
IP65 with cable plug

Environment and Installation
Installation position
As required, preferably with solenoid system upright; air exhausted from the relief port with pressed sintered bronze silencer must not be impeded
Ambient temperature (max.) 55 °C

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th