ข้ามไปยังเนื้อหา
Male connector DIN EN 175301-803 – form A
Cable plug device Type 2509 for connection of electrical components according to DIN EN 175301-803.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties |
|
| Dimensions |
Detailed information can be found in chapter “3. Dimensions” on page 4.
|
| Body material |
PA (polyamide)
|
| Contact material | Copper alloy, silver-plated |
| Cable outlet | Vertically to the plug bottom, insert can be rotated by 4 × 90° |
| Cross section area |
≤3 mm2
|
| Isolation between cable plug and coil | NBR flat seal |
Electrical Data |
|
| Rated voltage |
0…250 V AC/DC
|
| Max. continuous current |
6 A
|
| Poles | 2 pin + protective earth |
| Flammability class (body & cover) | UL94 V-0 |
| Flammability class (insert) | UL94 HB |
Approvals and Certificates |
|
| UR Approval | Detailed information can be found in chapter “2. Approvals” on page 3. |
Process / Port Connection & Communication |
|
| Connection thread | 1⁄2″ NPT |
| Electrical connection | Acc. DIN EN 175301-803 Form A |
| Connection type | Screw-type terminal |
| Connection cables | Max. 6,5 mm |
Environment and Installation |
|
| Ambient temperature |
– 10 °C…+ 55 °C (+ 14 °F…+ 131 °F)
|
| Degree of protection |
IP65 (NEMA 4)
|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th