Skip to content
2/2 way Plunger-Solenoid Valve with separating diaphragm
Type 117 is a normally-closed direct-actingplunger-type solenoid valve with PTFE-coated diaphragm. The diaphragm isolates the fluidfrom the solenoid system. When deenergized (in circuit function A)the valve is closed by spring action. When energized, the solenoid armature is drawn in 2/2 way, G 1/8, UNF 1/4-28 FluidControl Systems against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties |
|
| Seal material |
ETFE (TEFZEL)
|
| Body material |
PTFE with EPDM / PTFE with FKM
|
|
Max. viscosity
|
21 mm2/s
|
|
Nominal operating mode
|
Continuous operation (duty cycle 100 %)
|
|
Protection class with cable plug
|
IP65
|
Electrical Data |
|
|
Operating voltages
|
12 V DC, 12 V DC battery, 24 V DC, 24 V UC, 220…230 V UC
|
| Voltage tolerance | ±10% |
|
Electrical connections
|
Standard delivery: Cable plug DIN 43 650 Form B, 0…250 V, wires 300 mm length |
Performance Data |
|
| Opening Response time |
Approx. 20 ms
|
| Closing Response time |
Approx. 20 ms
|
|
Electrical power consumption
|
4 W
|
|
Switching frequency
|
Up to 300 c.p.m.
|
Environment and Installation |
|
|
Max. ambient temperature
|
Max. + 55 °C
|
|
Installation position
|
Any, preferably with solenoid actuator face up
|
Media Data |
|
| PTFE / EPDM medium | Alkalis, mineral acids and organic acids, washing and bleaching lyes |
| PTFE / FKM medium |
Oxidising acids and lyes, saline solutions, oils and waste gases
|
|
Medium temperature
|
– 10 °C…+ 70 °C
|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th