Burkert – Type 8055 Electromagnetic Flowmeter with a Flange

Full bore magmeter with flanges

The complete full bore magflowmeter Type 8055, which consists of a magnetic sensor Type S055 (in compact or remote version) connected to a transmitter Type SE56 (without display in compact version or with display in compact or remote version), is designed for applications with liquids with a minimum conductivity of 5 μS/cm.

Combined with a valve as the actuating element, the complete full bore magf lowmeter Type 8055 can also control high-precision dosing operations and f low measurements in potable water treatment and waste water treatment.

TYPE 8055

• Burkert - Type 8644 - AirLINE Remote Process Actuation Control System
• BURKERT - TYPE 8693 Digital Electro Pneumatic Positioner for Integrated Mounting on Process Control Valves

General Technical Data

Product properties
Sensor housing	Carbon steel painted (stainless steel 304 or 316 on request)
Electrode	Stainless steel 316L (Alloy C, Titanium, Tantalum, Platinum-rhodium on request)
Lining	PP or ebonite (hard rubber) (PTFE on request)
Seal	• FKM (EPDM on request) with PP lining • Without gasket with ebonite (hard rubber) lining (with PTFE lining on request)
Pipe diameter	DN 25…DN 200 (upper DN on request)
Dimensions	Detailed information can be found in chapter “3. Dimensions” on page 6.
Measuring principle	Electromagnetic induction Detailed information can be found in chapter “5.1. Measuring principle” on page 9.
Measuring range	0…0.72 m3/h to 0…1130 m3/h Detailed information can be found in chapter “6.4. Ordering chart sensor Type S055” on page 11.
Performance data
Measurement deviation	If used with SE56 transmitter: •in standard compact version: ± 0.2 % of reading •in standard remote version: ± 0.2 % of reading •in Basic compact version: ± 0.8 % of reading •in compact version without display: ± 0.2 % of reading
Repeatability	If used with SE56 transmitter: • in standard compact version: ± 0.1 % • in standard remote version: ± 0.1 % • in Basic compact version: ± 0.2 % • in compact version without display: ± 0.1 %
Vacuum resistance	200 mbar (2.9 PSI) absolute at 100 °C (212 °F)
Medium data
Fluid temperature	•With PP lining used with SE56 transmitter: – in standard compact version: – 0…+ 60 °C (+ 32…+ 140 °F) – in standard remote version: – 0…+ 60 °C (+ 32…+ 140 °F) – in Basic compact version: – 0…+ 60 °C (+ 32…+ 140 °F) – in compact version without display: – 0…+ 60 °C (+ 32…+ 140 °F) •With PTFE lining (on request) used with SE56 transmitter: – in standard compact version: – 20…+ 100 °C (- 4…+ 212 °F) – in standard remote version: – 20…+ 130 °C (- 4…+ 266 °F) – in Basic compact version: – 10…+ 100 °C (+ 14…+ 212 °F) – in compact version without display: – 20…+ 100 °C (- 4…+ 212 °F)
Fluid pressure	PN 16 (232 PSI) with PP lining
Minimum conductivity	5 µS/cm (or 20 µS/cm with demineralised water)
Process/Port connection & communication
Process connection	Flange EN1092-1, ANSI B16-5, (JIS on request)
Electrical connection	2 cable glands PG9 (for remote version of the sensor)
Approvals and certificates
Degree of protection according to  IEC/EN 60529	If used with SE56 transmitter: • in standard compact version: IP65 and IP67 • in standard remote version: – IP65 – IP68 (if the junction box of the sensor is filled with resin) • in Basic compact version: IP65 • in compact version without display: IP65 and IP67
CE directives	The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applica-ble).
Pressure equipment directives	The device is subject to the requirements of the Pressure Equipment Directive 2014/68/EU. Category II device for group 1 and 2 fluids under the following conditions: • maximum allowable pressure (PS) ≤ 40 bar • minimum/maximum temperature (TS): – 10/+ 130 °C • within the following limits for liquids of group 2: – PN 10 for DN 400…DN 500 – PN 16 for DN 250…DN 300 – PN 25 for DN 200…DN 250 – PN 40 for DN 40…DN 250 • within the following limits for liquids of group 1 with a vapour pressure at the maxi-mum allowable temperature not exceeding 0.5 bar (g): for diameters above DN 25 and PS x DN > 2000
Environment and installation
Ambient temperature	If used with SE56 transmitter: • in standard compact version: – 20…+ 60 °C (- 4…+ 140 °F) (operation and storage) • in standard remote version: – 20…+ 60 °C (- 4…+ 140 °F) (operation and storage) • in Basic compact version: – 10…+ 50 °C (+ 14…+ 122 °F) (operating) – 20…+ 50 °C (- 4…+ 122 °F) (storage) • in compact version without display: – 20…+ 40 °C (- 4…+ 104 °F) (operation and stor-age)
Relative air humidity	≤­90­%,­without­condensation
Height above sea level	Max.­2000 m
Operating condition	Continuous
Equipment mobility	Fixed device
Application range	Indoor­and­outdoor­(protect­the­device­against­electromagnetic­interference,­ultraviolet­rays and­against­the­effects­of­climatic­conditions)
Installation category	Category II according to UL/EN 61010-1
Pollution degree	Degree 2 according to UL/EN 61010-1

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th