Plunger valve 2/2 way direct-acting
Burkert type 6013 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant epoxy. Pulse coils and ‘Kick and Drop’ electronics are available for overexcitation (plug 2511) for the reduction of electrical power consumption during operation. Optional manual actuation enables quick commissioning and easy maintenance.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 6013 สามารถใช้ได้ร่วมกับ
General Technical Data | Burkert - Type 6013
Product Properties | ||
Dimensions | Detailed information can be found in chapter “6. Dimensions” on page 9. | |
Seal Material | FKM, PTFE/Graphite (EPDM on request) | |
Body Material | Brass, stainless steel 1.4305 | |
Orifice | DN 2.0...DN 6.0 | |
Circuit Function | A and B | |
Thermal insulation class of solenoid coil | Polyamide class B / Epoxy class H | |
Performance data | ||
Duty cycle/single valve with block assembly on manifold | 100 % continuous rating Intermittent operation 60 % (30 min) or with 5 W coil (on request) | |
Electrical data | ||
Standard version | 24 V DC, 24 V/50 Hz, 230 V/50 Hz | |
Analytical version | 24 V DC, 230 V/50 Hz (other voltages on request) | |
Voltage tolerance | ± 10% | |
Medium data | ||
Operating medium Standard version | Technical vacuum, neutral gases and liquids (e.g. compressed air, water, hydraulic oil) | |
Analytical version | Neutral medium, which does not attack the body and seal materials | |
Medium temperature | ||
With FKM | - 10 °C…+ 100 °C (PA coil), -10 °C…+ 120 °C (Epoxy coil) | |
With PTFE/Graphite | 40 °C…+ 180 °C | |
Analytical version | 24 V DC, 230 V/50 Hz (other voltages on request) | |
With FKM, circuit function B | 10 °C…100 °C (AC),…10 °C…120 °C (DC) | |
Viscosity | Max. 21 mm²/s | |
Process/Port connection & communication | ||
Electrical connection | Tag connector acc. to DIN EN 175301-803 Form A for cable plug Type 2518 (see “10.5. Order-ing chart accessories” on page 20) ATEX/IECEx version with 3 m moulded cable | |
Port connection | ||
Standard version | G ⅛, G ¼, G ⅜, sub-base (SFB) | |
Analytical version | G ⅛, G ¼ | |
Approvals and certificates | ||
Degree of protection | IP65 with cable plug, ATEX/IECEx junction box version and cable connection version | |
Environment and installation | ||
Installation position | As required, preferably with actuator upright | |
Installation instructions | No oils, fats or silicone to be used during installation | |
Ambient temperature (max.) | + 55 °C |