โซลินอยด์วาล์ว 2/2, 3/2 ทาง 1/4" นิ้ว COIL 24 V DC Type 6012 ยี่ห้อ Burkert

Burkert – Type 6012 – 3/2 Way Direct-Acting Plunger Valve

จุดเด่นของ Type 6012 – 3/2 Way Direct-Acting Plunger Valve

Screwed coil system
Service-friendly manual override
Simple and quick push-in, flange, or manifold installation
Banjo threaded connection for direct mounting on pneumatic valves
Direct-acting, compact small-format valve with diameter of up to DN 1.6

Send Email LINE OA

คำอธิบาย

Plunger valve 3/2 way direct-acting

Valve Type 6012 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. A banjo connection with banjo bolt is the ideal solution for easy direct mounting on a pneumatic drive. Optional manual actuation enables quick commissioning and optimal maintenance. In combination with a cable plug in accordance with industry standard Form B or DIN EN 17301-803 Form C, the valves satisfy protection class IP65.

The type 6012 is only available until 6/30/26.
The successor types are (can be alittle different because of the update) : 7012

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6012

BURKERT TYPE 6012 สามารถใช้ได้ร่วมกับ

General Technical Data

Product Properties
Dimensions	Detailed information can be found in chapter “4. Dimensions” on page 6.
Body material	Brass, polyamide (PA), stainless steel 1.4305
Seal material	FKM, NBR
Standard version weight	125 g (G 1⁄8)
Banjo version weight	135 g
Thermal insulation class of solenoid	Polyamide: Class B / Epoxy: Class H
Manual override	Optional, as a standard feature (for Type 6012, banjo version)

Performance Data
Duty cycle/single valve for block assembly on multiple manifold	100 % continuous rating / Intermittent operation 60 % (30 min) with 2 W coil 100 % (on request)
Standard version response time	DN 1.2 mm: Opening 7…10 ms, Closing 9…12 ms / DN 1.6 mm: Opening 7…12 ms, Closing 7…12 ms
Banjo version response time	DN 1.2 mm, 4 W AC: Opening 7…10 ms, Closing 9…12 ms / DN 1.2 mm, 4 W DC: Opening 7…12 ms, Closing 7…12 ms
Circuit function	C and D (see “2. Circuit functions” on page 4)

Electrical Data
Operating voltage	24 V DC, 24 V / 50 Hz, 110 / 230 V / 50 Hz
Voltage tolerance	±10%

Medium Data
Viscosity (max.)	21 mm2/s
Medium	Neutral gases and liquids (e.g. compressed air, water, hydraulic oil, technical Vacuum)
Standard version medium temperature	– 10 °C… + 100 °C
Banjo version medium temperature	– 10 °C… + 60 °C

Process / Port Connection & Communication
Standard version port connection	M5, G 1⁄8, Flange
Banjo version port connection	G 1⁄8, G 1⁄4 and tube fitting Ø 6 mm
Electrical connection	Acc. to DIN EN 175301 – 803 Form C for cable plugType 2516 (see “6.4. Ordering chart accessories” on page 13) / Acc. to industry standard connector Form B for cable plug Type 2507 (see “6.4. Ordering chart accessories” on page 13) / Flying leads on request

Environment and installation
Installation instructions	As required, preferably with actuator upright
Standard version ambient temperature	Max. + 55 °C
Banjo version ambient temperature	– 10 °C… + 40 °C

Approvals and Certificates
Degree of protection	IP65 with cable plug

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.