Burkert-Type 2863 - Direct acting 2-way basic proportional valve

Burkert-Type 2863 - Direct acting 2-way basic proportional valve-02

Burkert-Type 2863 - Direct acting 2-way basic proportional valve-01

Burkert-Type 2863 - Direct acting 2-way basic proportional valve-03

Burkert – Type 2863 – 2 Way Direct-Acting Basic Proportional Valve

จุดเด่นของ Type 2863

Good range
High dynamics
Orifice sizes DN 0.8 … 4.0 mm
Optional: Explosion-protected coil

Send Email LINE OA

หมวดหมู่: General Puspose Solenoid Control Valves, Solenoid Control valves

รายละเอียดเพิ่มเติม

Direct acting 2-way basic proportional valve

Type 2863 is an extremely compact solenoid control valve and is available with an orifice up to 4mm. It is based on the standard version of Type 2873. It is used as an actuator in closed control loops (pressure, flow, temperature, etc.). Compared with the standard version, the valve is essentially of simpler construction and assembly and testing procedures are optimized, easing high volume series production with shorter delivery times.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 2863

TYPE 2863 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions	Detailed information can be found in chapter “5. Dimensions” on page 5.
Material
Body	Brass, stainless steel
Seal	FKM, EPDM
Performance data
Hysteresis	< 5 %
Reproducibility	< 1 % of end value
Response sensitivity	< 1 % of end value
Setting range	1:25
Pressure range	0…16 bar
Nominal operating mode	100 % continuous operation
Electrical data
Operating voltage	24 V DC (12 V on request)
Power consumption	Maximal 9 W
Maximum coil current	420 mA (at 9 W and 24 V coil)
PWM frequency	400 Hz
Medium data
Operating medium	Neutral gases, liquids on request
Medium temperature	– 10 °C…+ 90 °C (with FKM) – 30 °C…+ 90 °C (with EPDM)
Viscosity	21 mm2/s (21 cSt)
Process/Port connection & communication
Port connection size	Sub-base, G ⅛, G ¼, NPT ⅛, NPT ¼
Electrical connection	Cable plug Type 2518 acc. to DIN EN 175301 – 803 form A Detailed information can be found in chapter “Cable plug Type 2518, Form A accord-ing to DIN EN 175301 – 803” on page 10.
Approvals and certificates
Degree of protection	IP65
Environment and installation
Installation position	Any, preferably actuator face up
Ambient temperature	Maximum + 55 °C

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.