Burkert-Type 0127 - Direct-acting Rocker-Solenoid Valve with separating diaphragm

Burkert – Type 0127 – 2/2 or 3/2 Way Direct Acting Solenoid Valve with Separating Diaphragm

จุดเด่นของ Type 0127

Proven reliability since 1993
Flexible design for custom manifold assemblies
For maximum chemical resistance requirements
Compact design with 16 mm width and Cv ratings up to 0.058
High back pressure tightness, excellent cleanability and 100 % duty cycle

Send Email LINE OA

หมวดหมู่: 2/2 and 3/2 way micro Solenoid Valves, Microfluidic Valves

คำอธิบาย

Direct-acting 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

Bürkert’s unique miniature rocker solenoid valve is the pioneer of isolated mini valves suitable for laboratory, medical and analysis technology, that still set the standard! It is a highly reliable minimum volume valve that has low dead volume and is easy to purge. Boasting an inert isolating diaphragm between the actuator and body, it is operated via a rocker that separates the actuator from the fluid. Heat transfer between the actuator and the fluid is minimized due to the coil not having direct contact with the diaphragm. The valves can be manifold mounted and a simplified common wiring system is available if required. Special dead volume free designs are also obtainable on request.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 0127

BURKERT TYPE 0127 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions	Detailed information can be found in chapter “5. Dimensions” on page 6.
Material
Fluid housing	PEEK, PVDF, PPS
Seal	FFKM, FKM, EPDM
Nominal diameter/Orifice	10 mio. switching cycles (according to laboratory endurance test with FKM and EPDM)
Internal volume	Sub-base: starting at 44 µl G ⅛ and NPT ⅛: starting at 100 µl UNF ¼… 28: starting at 25 µl Tube connection: starting at 33 µl < 10 µl available on request
Orifice	DN 0.8…DN 1.6
Performance data
Response times	Open: ca. 25 ms (Pressure rise 0…10 %) Closing: ca. 25 ms (Pressure drop 100…90 %)
Electrical data
Operating voltage	12/24 V DC, other voltages are available on request
Voltage tolerance	± 10 %
Power consumption	3.4 W
Duty cycle	100 % continuous rating Manifold mounting: If medium or ambient temperatures are above + 40 ºC: intermittent operation 40 % (minimum 10 min)
Medium data
Medium temperature	– 10 °C…+ 55 °C
Operating medium	Resistant to neutral gases (5 µm filtering); see chapter “4.1. Chemical Resistance Chart – Bürk-ert resistApp” on page 5.
Viscosity (max.)	21 mm²/s
Process/Port connection & communication
Port connection	Bürkert sub-base (16 × 27 mm) G ⅛ NPT ⅛ UNF ¼ …28 Tube connection
Electrical connection	Cable plug Type 1054 Two FEP-leads 0.2 mm², length 500 mm Rectangular cable plug, Type 2505
Approvals and certificates
Protection class	IP65 with flying leads and cable plug Type 1054 IP30 with rectangular plug Type 2505
Environment and installation
Ambient temperature (max.)	55 °C
Installation position	As required, preferably with actuator upright

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.