Showing 2661–2667 of 4554 results

  • DeviceNet module is directly integrated on Enova solenoid valves manifold via a 25 poles connector, normally used for multipolar cable connection.

  • CANopen® module is directly integrated on Optyma-F solenoid valves manifold via a 37 poles connector, normally used for multipolar cable connection. Optyma-F solenoid valves connected to node must be PNP equivalent (final 02 in ordering code).

  • Carbon filter
  • Available in 2 sizes with connections from 3/8” to 1”
  • Active carbon cartridge with built in particulate filter
  • Used to remove oil vapours, hydrocarbons, odours and particles
  • Oil residue up to <0,003 ppm (max imput aereosol 0.01 ppm)
  • High absorption capacity, with low differential pressure
  • Filtering performances 99.97% (particles up to 0.01 µm)
  • Bowl assembly via bayonet type quick coupling mechanism with safety button Semi-automatic drain
  • Atex certification (II 2GD or II 3GD)
  • Inlet pressures up to 20 bar

  • 1/4″ NPT ถึง 1″ NPT
  • การรับรอง Atex II 2GD, SIL3 and CU-TR 012
  • มีความเสถียรและความสามารถในการทำซ้ำสูง
  • Double hysteresis rolling membrane system
  • มีตัวควบคุมการไหลแบบทิศทางเดียวและแบบสองทิศทาง
  • มีทั้งแบบอะลูมิเนียมเคลือบอีพ็อกซี่หรือแบบสเตนเลส AISI 316L
  • เหล็กกล้าไร้สนิมรุ่น AISI 316L ตามมาตรฐาน NACE MR0175 - ISO15156/1

Version 3100 (10mm) and 3400 (15,5mm) Nominal flow rate up to 200 Nl/min (Version 3100) and up to 600 Nl/min (Version 3400) Stand alone or manifold mounted versions Valve replacement without disconnecting the tubes Available with a wide range of serial system protocols Wide range of accessories Available sub-base mounted or with M5 threaded ports

Electromechanical device used to control the passage of a fluid in an installation. Pneumatic valves are mechanical devices for regulation and control of air. Among its main functions are to start, stop or regulate the passage of gases. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it

  • With the introduction of the “T” configuration of solenoid valves with integrated pneumatic connections fitted directly on the sub base the 2500 series (called OPTYMA) is now richer than ever.